We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange Y-splitter cable with two 3-pin fan connectors, pre-sleeved, 15cm arms

Darkside

Darkside 3-Pin Dual Fan Y-Splitter Orange 15cm DS-0929

SKU CH-8SWD-RCX2R

Connects two 3-pin fans to one 3-pin header using pre-sleeved 15 cm branches

  • Cable Length5.91 in.
  • Connects two 3-pin fans to a single 3-pin header
  • Each arm measures 15 cm for tidy routing
  • Pre-sleeved cables reduce clutter inside the case
  • 91 inch total length suits compact builds
  • Orange colour aids quick cable identification

Dual 3-Pin Fan Y-Splitter

Connect two 3-pin case or radiator fans to a single motherboard header or fan controller using this pre-sleeved Y-cable. Each arm measures 15 cm, giving a total reach of 5.91 inches per branch. The orange sheathing adds visibility inside the chassis. It is intended for builders who need to run a pair of fans from one 3-pin power source.

Three-Pin Voltage Control Limit

The splitter passes only the three pins supplied by the source header, so speed regulation relies on voltage control rather than PWM signalling. Fans equipped with four-pin PWM connectors will still spin, but the fourth pin is not carried through, preventing automatic duty-cycle adjustments. Builders who require per-fan PWM curves should note this constraint.

Fifteen-Centimetre Arm Length

Each branch extends 15 cm from the split point, which determines how far apart the two fans can be mounted. If the installation demands longer runs between the splitter and either fan, this cable will not reach without an additional extension.

Highlights

  • Connects two 3-pin fans to a single 3-pin header
  • Each arm measures 15 cm for tidy routing
  • Pre-sleeved cables reduce clutter inside the case
  • 91 inch total length suits compact builds
  • Orange colour aids quick cable identification

Specifications

Cable Length5.91 in.

Questions about this item

Should I pick the 15 cm arms or a longer cable for my fan controller?

Each arm measures 15 cm, giving 5.91 in of reach from the splitter to each 3-pin fan header.

What does the 3-pin connector actually control when the splitter is in use?

The 3-pin source delivers voltage-based speed control to both attached fans simultaneously.

Does the 3-pin interface limit PWM or voltage regulation on the connected fans?

The 3-pin Y-splitter passes voltage control only; PWM signalling is not carried over this connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.