We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack PDU with eight C13 outlets and a 10 ft cord

CyberPower

CyberPower PDU81005 Switched Metered 1U PDU 20A 8xC13 10ft

SKU CH-J6V5-YZPVJ MPN PDU81005

A switched and metered 1U PDU delivering 20A input through a 10 ft cord to eight C13 outlets with remote network management

  • TypeSwitched, Metered
  • Rack Size1U
  • Remote Management ProtocolIPv4, TCP/IP UDP SNMPv1 HTTP NTP DNS Telnet DHCP SMTP FTP IP
  • Front Panel LEDsVoltage Frequency Load Current HW/FW Version Network informa
  • ConnectivityRJ45 (Ethernet), RJ45 (COM Port)
  • Input Voltage100-240V
  • Switched outlet control enables remote power cycling
  • Metered-by-outlet monitoring tracks real-time energy use per device
  • 1U rackmount form factor fits standard server cabinets
  • 20 A input capacity supports high-density equipment loads
  • 10 ft IEC C20 cord provides flexible rack placement

1U Switched Metered PDU

The CyberPower PDU81005 is a 1U rackmount power distribution unit that provides switched and metered-by-outlet control over eight IEC-320 C13 outlets. It accepts 100-240V input at 50/60 Hz through a C20 inlet on a 10 ft cord and supports a maximum input current of 20A with a regulatory derated limit of 16A. Network managers who need remote power cycling and per-outlet energy visibility in a single rack space will find it suitable.

Upgrade from basic PDUs

This unit replaces non-switched or aggregate-metered strips by adding outlet-level switching and measurement plus a full IPv4/IPv6 management stack including SNMPv3, HTTPS, SSH, RADIUS, LDAP(S) and Syslog. The jump is worth it when administrators must reboot individual servers, set power-on sequencing or track consumption per device without deploying separate metering hardware. Buyers who only need aggregate current readings or local switching will not use the extra protocols.

Sustained load behaviour

Front-panel LEDs display real-time voltage, frequency, load, current and firmware version so operators can verify steady-state conditions at a glance. The 17.05" x 1.75" x 4.41" chassis weighs 4.63 lbs and relies on passive cooling within the rack airflow; no overload protection is built in, so continuous draw must stay within the 16A derated rating. Remote CLI and Windows AD integration allow automated alerts if currents drift upward during prolonged operation.

Highlights

  • Switched outlet control enables remote power cycling
  • Metered-by-outlet monitoring tracks real-time energy use per device
  • 1U rackmount form factor fits standard server cabinets
  • 20 A input capacity supports high-density equipment loads
  • 10 ft IEC C20 cord provides flexible rack placement

Specifications

BrandCyberPower
SeriesSwitched Metered-by-Outlet PDU Series
ModelPDU81005
TypeSwitched, Metered
Rack Size1U
Remote Management ProtocolIPv4, TCP/IP
UDP
SNMPv1
HTTP
NTP
DNS
Telnet
DHCP
SMTP
FTP
IPv6
SNMPv3
HTTPs
SSH
SSL
TLS
LDAP(S)
RADIUS
Syslog
CLI
Windows AD
Front Panel LEDsVoltage
Frequency
Load
Current
HW/FW Version
Network information
ConnectivityRJ45 (Ethernet), RJ45 (COM Port)
Input Voltage100-240V
Input Frequency50/60 Hz
Maximum Input Current20A
Regulatory Derated Input Current16A
Input Connector(s)IEC-320 C20
Cord Length10 ft
Output Connector(s)8 x IEC-320 C13
Overload ProtectionNo
Dimensions17.05" x 1.75" x 4.41"
Weight4.63 lbs.
Shipping weight3.86 kg
Package size514 × 262 × 70 mm

Questions about this item

What rack depth and height does the 17.05" x 1.75" PDU81005 require?

The unit occupies 1U of rack height and needs at least 17.05 inches of clear depth plus cable bend radius behind the mounting ears.

Which step is often missed when configuring the RJ45 Ethernet and COM ports for remote management?

After connecting the Ethernet cable, you must assign a static IP or enable DHCP via the front panel or serial console before SNMPv3, HTTPS or SSH will respond.

When should the 10 ft IEC C20 input cord be inspected or replaced?

Inspect the cord and C20 plug annually for cracking, discoloration or loose retention clips; replace immediately if any damage is found.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.