CyberPower
CyberPower PDU42011 PDU 100-120V 15A Switched 10ft NEMA 5-15P SNMP
A switched power distribution unit with a 10 ft cord, single-phase 100-120 VAC input and SNMP monitoring
- Switched outlets enable remote power cycling via SNMP
- 10 ft cord provides flexible rack placement
- 15 A maximum input supports high-density equipment
- Derated 12 A continuous current ensures safe operation
- NEMA 5-15P plug fits standard North American receptacles
Switched PDU for 100-120 V Racks
The CyberPower PDU42011 is a single-phase switched power distribution unit rated for 100-120 VAC input. It delivers up to 15 A maximum current, derated to 12 A for continuous operation. Network managers use it to cycle power on individual outlets remotely via SNMP.
Fits Standard 15 A Circuits with 10 ft Cord
The unit connects through a NEMA 5-15P plug on a 10 ft (3.0 m) cord, reaching nearby wall receptacles or UPS outputs without extension leads. It operates on 50 Hz to 60 Hz supplies and draws a maximum of 15 A, so the upstream breaker must support that load. No additional mounting hardware is described in the data.
SNMP Control Changes Outlet Management
Built-in SNMP support lets administrators reboot locked devices, schedule shutdowns, and monitor load levels from a central console. This removes the need for physical site visits to toggle power.
Highlights
- Switched outlets enable remote power cycling via SNMP
- 10 ft cord provides flexible rack placement
- 15 A maximum input supports high-density equipment
- Derated 12 A continuous current ensures safe operation
- NEMA 5-15P plug fits standard North American receptacles
Specifications
No published specifications for this item yet.
Questions about this item
What is the derated current limit that applies during sustained operation of this PDU?
The unit is rated for a maximum input current of 15 A but is derated to 12 A for continuous use, so the sustained limit is 12 A.
How much heat or noise does the switched PDU produce during all-day operation?
The PDU has no built-in cooling fans, so it runs silently and generates only the minimal heat from power passing through its internal relays and circuitry.
What input connection must already be available on site for this PDU to work?
A standard NEMA 5-15R wall receptacle supplying 100–120 VAC single-phase power is required to plug in the 10 ft NEMA 5-15P cord.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



