We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

CyberPower

CyberPower PDU33108 PDU 3-Phase 200-240V 50A 42 Outlets 10ft Hubbell CS8365C 0U LCD

SKU CH-ST9S-CCMFE MPN PDU33108

Three-phase monitored PDU distributes 200–240 V at 35 A derated load through 36 C13 and 6 C19 outlets on a 10 ft cord with Hubbell CS8365C plug

  • 3-phase power distributes load across 200-240V supply
  • 42 outlets (36 C13 + 6 C19) support dense rack deployments
  • Monitored PDU sends email, SMS and SNMP trap alerts
  • 50A input derated to 35A for continuous safe operation
  • Vertical 0U form factor with LCD saves rack space

Three-Phase Monitored PDU

The CyberPower PDU33108 is a three-phase monitored power distribution unit that operates at 200V-240V with a 50A input derated to 35A. It mounts vertically in a 0U rack footprint and provides 42 outlets in total. A 10ft cord terminates in a Hubbell CS8365C plug and an integrated LCD display shows local metering data.

High-density racks needing remote alerts

This unit suits data-centre racks that require outlet-level monitoring with email, SMS text and SNMP trap notifications. The mix of 36 IEC-320 C13 and 6 IEC-320 C19 outlets supports dense server and network gear deployments. Facilities limited to single-phase supply or lower amperage service should look at alternative power distribution units.

42-outlet count with C13/C19 mix

The single specification that decides fit is the outlet configuration of 36 C13 and 6 C19 receptacles delivering 42 connections from one vertical chassis. Match this count and connector mix to your equipment cable inventory before purchase. The 35A derated capacity and three-phase 200V-240V input must also align with your facility power.

Highlights

  • 3-phase power distributes load across 200-240V supply
  • 42 outlets (36 C13 + 6 C19) support dense rack deployments
  • Monitored PDU sends email, SMS and SNMP trap alerts
  • 50A input derated to 35A for continuous safe operation
  • Vertical 0U form factor with LCD saves rack space

Specifications

No published specifications for this item yet.

Questions about this item

Are the IEC-320 C13 and C19 outlets user-replaceable if one fails?

The 36 C13 and 6 C19 outlets are fixed on the vertical chassis; failed outlets require whole-unit service rather than individual replacement.

At what sustained load does the 35 A derating become the limiting factor?

Continuous draw above 35 A on the 3-phase input triggers the derated limit before the 50 A plug rating is reached.

How much heat does the unit add to a rack when fully loaded all day?

The monitored PDU itself draws only a few watts for its LCD and network card, so nearly all heat comes from the connected equipment, not the distribution unit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.