Corn Electronics Micro-USB to USB-C Adapter 2-Pack

Everyday carry for USB-C users

This two-pack adapter lets owners of USB-C laptops, tablets and phones keep using existing Micro-USB cables for charging and data sync. Each unit has a USB Type-C male plug on one side and a Micro-USB female port on the other, so legacy cords become instantly compatible. No driver or software setup is required; the connection works the moment it is inserted. The compact design adds negligible bulk to a bag or pocket.

Sustained charging at the rated limit

The adapter supports a continuous current of up to 2.4 A, allowing fast charging sessions to run without throttling or overheating. Data transfers operate at USB 2.0 speeds, which remain stable during long sync operations such as full device backups. Because the housing is passive and contains no active electronics beyond the connector wiring, performance does not degrade over extended use. Heat buildup is minimal even when the maximum current is drawn for prolonged periods.

Plug-in simplicity with one compatibility check

Installation is literal plug-and-play: insert the Type-C end into the host device and connect a Micro-USB cable to the female port. The only requirement is that the USB-C host supports USB On-The-Go when the adapter is used for OTG peripherals such as flash drives or keyboards. If OTG is not supported by the host, the adapter will still charge and sync but cannot act as a host for external devices. No mechanical force is needed, and the snug fit prevents accidental disconnection during normal handling.