We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat nylon-braided Cat 8 Ethernet cable 50 ft with RJ45 connectors

Corn Electronics

Corn Electronics Cat 8 Network Ethernet Cable 50 ft Nylon Braided 40Gbps 2000MHz SFTP RJ45 Flat Shielded 26AWG

SKU CH-DMAX-SNBN1

A 50 ft flat Cat 8 patch cord with nylon braid, SFTP shielding and 26 AWG conductors rated for 40 Gbps at 2000 MHz

  • Length50 ft.
  • 40Gbps bandwidth handles demanding gaming and streaming
  • 2000MHz frequency reduces latency for real-time applications
  • 26AWG copper core supports PoE for cameras and VoIP
  • Nylon braided jacket resists wear in indoor and outdoor runs
  • Flat profile simplifies routing along walls and under carpets

50 ft Cat 8 Ethernet Cable

This 50-foot Cat 8 patch cord delivers 40 Gbps throughput at 2000 MHz bandwidth. The flat, nylon-braided jacket and SFTP shielding suit indoor or outdoor runs, including in-wall installation. It terminates in standard RJ45 connectors compatible with modems, routers, gaming PCs and PoE devices such as cameras or VoIP phones. Backward compatibility covers earlier Cat 5 through Cat 7 equipment.

Sustained Load Behaviour

The 26 AWG copper conductors provide greater transmission capacity than thinner 30 AWG alternatives, helping maintain the rated 40 Gbps speed over the full 50 ft length under continuous traffic. SFTP shielding suppresses alien crosstalk and electromagnetic interference during prolonged high-throughput sessions such as large file transfers or competitive gaming. PoE power delivery remains stable without extra power cords for supported endpoints.

Pre-Installation Checks

Verify that your router, switch or NIC supports 40 Gbps BASE-T to utilise the cable's maximum rate; the link will otherwise negotiate at the highest mutual speed. Confirm the flat profile fits your planned routing path, including under doors, along baseboards or through conduit. Ensure both ends have standard RJ45 ports; no proprietary connectors or special crimping tools are required for this cable.

Highlights

  • 40Gbps bandwidth handles demanding gaming and streaming
  • 2000MHz frequency reduces latency for real-time applications
  • 26AWG copper core supports PoE for cameras and VoIP
  • Nylon braided jacket resists wear in indoor and outdoor runs
  • Flat profile simplifies routing along walls and under carpets

Specifications

Length50 ft.

Questions about this item

How much heat or power draw should I expect from the 26AWG copper cores when the cable runs at 40Gbps all day?

The 26AWG conductors are passive and draw no power themselves; they only carry the signal, so there is no measurable heat from the cable during continuous 40Gbps use.

What devices must I already own to use the RJ45 connectors on this 50 ft Cat 8 cable?

Any device with a standard RJ45 port — router, modem, switch, PC, gaming console, PoE camera or access point — will plug straight in; no adapter or special hardware is required.

Will this flat shielded Cat 8 cable work reliably alongside my existing Cat5e and Cat6a patch cords in the same rack?

Yes, the cable is backward compatible with Cat5, Cat5e, Cat6, Cat6a and Cat7 equipment, so it can sit beside older patch cords without interference or speed negotiation issues.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.