Corn Electronics
Corn Electronics 9.5mm SATA HDD Caddy Adapter for Optical Bay
Adds a second 2.5-inch SATA drive to a 9.5 mm optical bay for extra storage or dual-booting
- Add a second drive without cables using the 9.5 mm SATA caddy
- Dual-boot two operating systems from separate drives in one laptop
- Fits 2.5 inch 9.5 mm and 12.7 mm SATA HDD or SSD
- Plug-and-play installation requires no drivers or external power
- Weighs 67 g with 12.7 x 12.6 x .95 cm compact form
Second Drive for Optical Bay
This 9.5 mm SATA caddy replaces a laptop optical drive with a 2.5 inch HDD or SSD. It adds a second internal drive without cables, extra power or driver installation. The adapter suits users who want more local storage on a machine that lacks a free drive bay.
Sustained Operation
The caddy provides a direct SATA link so the added drive runs at the same speed as the primary disk during long copies or backups. No external power supply is required, so thermal load stays inside the chassis. Performance over hours matches the drive’s own sustained rating rather than a burst figure.
Installation Notes
Remove the optical drive, slide the caddy in and secure it with the original screws. The tray accepts 9.5 mm and 12.7 mm drives, but thicker 2.5 inch models will not fit. Some laptops use a proprietary bezel or screw pattern that prevents the caddy from seating fully.
Highlights
- Add a second drive without cables using the 9.5 mm SATA caddy
- Dual-boot two operating systems from separate drives in one laptop
- Fits 2.5 inch 9.5 mm and 12.7 mm SATA HDD or SSD
- Plug-and-play installation requires no drivers or external power
- Weighs 67 g with 12.7 x 12.6 x .95 cm compact form
Specifications
No published specifications for this item yet.
Questions about this item
Does the 9.5 mm SATA caddy generate extra heat or noise when the second drive runs all day?
The adapter has no fan or moving parts, so it adds no noise; heat comes only from the drive you install.
What must my laptop already have for this 9.5 mm SATA caddy to work?
A 9.5 mm or 12.7 mm thick optical bay that accepts a standard SATA connection.
Will the caddy work alongside my original SATA hard drive without cable or driver changes?
Yes — it plugs directly into the same SATA interface the optical drive used and needs no extra cables or drivers.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
