We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 120mm square PWM case fan with hydraulic bearing, no LED, rubber anti-vibration corners

Corn Electronics

Corn Electronics 120mm PWM case fan white non-LED hydraulic bearing

SKU CH-NRKJ-D1RNY

A 120 mm PWM case fan with hydraulic bearing, 700–1800 RPM, 76.16 CFM airflow and 15.2–35.2 dB noise in white without LEDs

  • TypeCase Fan
  • ColorWhite
  • LEDNon-LED

LED Non-LED

Model PWM

Option 1 Pack

  • PWM control adjusts speed from 700 to 1800 RPM
  • Hydraulic bearing provides quiet operation down to 15.2 dB(A)
  • Delivers up to 76.16 CFM airflow for effective cooling
  • Generates 2.16 mmH₂O static pressure for heatsink performance
  • Rubber anti-vibration pads reduce case resonance at 2.4W power

120 mm PWM case fan for quiet builds

The Corn Electronics 120 mm white fan uses a hydraulic bearing and PWM control to deliver 76.16 CFM at up to 1800 RPM. It fits standard 120×120×25 mm mounting points and weighs 150 g. The non-LED design keeps the interior dark for clean aesthetics.

PWM speed range limits low-end control

The 4-pin PWM connector allows automatic speed regulation between 700 and 1800 RPM. Below the 7 V starting voltage the motor will not spin, so very low duty cycles may stall the fan. Maximum noise reaches 35.2 dB(A) at full speed, while idle operation sits at 15.2 dB(A).

Replaces fixed-speed or sleeve-bearing fans

Builders upgrading from 3-pin fixed-speed fans gain temperature-based control and a wider 700–1800 RPM range. The hydraulic bearing offers longer life than sleeve types at similar cost. Buyers who need higher static pressure for dense radiators or more airflow than 76.16 CFM should consider larger or faster models.

Highlights

  • PWM control adjusts speed from 700 to 1800 RPM
  • Hydraulic bearing provides quiet operation down to 15.2 dB(A)
  • Delivers up to 76.16 CFM airflow for effective cooling
  • Generates 2.16 mmH₂O static pressure for heatsink performance
  • Rubber anti-vibration pads reduce case resonance at 2.4W power

Specifications

TypeCase Fan
ColorWhite
LEDNon-LED

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Is the 120 × 120 × 25 mm size the only version available?

The supplied facts describe a single 120 × 120 × 25 mm model; no other dimensions or capacity variants are listed.

What does the 76.16 CFM airflow rating mean once the fan is installed?

At the maximum 1800 RPM the fan can move up to 76.16 CFM of air through a case or cooler, with actual flow depending on system resistance.

What does the 4-pin PWM connector cap in practice?

The 4-pin PWM connector allows the motherboard to vary speed between 700 and 1800 RPM, so the fan never exceeds the 2.4 W power input or 35.2 dB(A) noise ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.