We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black 120mm ARGB case fans with hydro bearings and a control hub

Corn Electronics

Corn Electronics 120mm ARGB Case Fan 5-Pack Hydro Bearing 1400 RPM 37.8 CFM 25 dBA

SKU CH-6AB6-5PD19

Five 120 mm hydro-bearing fans deliver 37.8 CFM at up to 1400 RPM and 25 dBA, with ARGB lighting controlled via wireless remote or 5 V motherboard sync and a hub supporting up to 10 fans

  • Fan Counts5 Fans
  • TypeCase Fan
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM0-1400 RPM
  • Air Flow37.8CFM ±10%
  • RF wireless remote adjusts speed, mode and colour with one key press
  • ARGB control box powers up to ten fans and two LED strips
  • 120 mm fans deliver 37.8 CFM airflow for high-volume cooling
  • Hydro bearing runs at 25 dBA for quiet operation
  • 5V 3-pin motherboard sync works with ASUS Aura, MSI and GIGABYTE software

Five-Fan ARGB Kit

This five-pack of 120 mm ARGB case fans is aimed at builders who want coordinated lighting and airflow from a single package. Each fan uses a hydro bearing and runs at up to 1400 RPM to deliver 37.8 CFM. The included control box handles up to 10 ARGB fans and two additional ARGB LED devices. Builders who need more than five fans in one lighting zone can expand without buying another kit.

Sustained Airflow and Acoustics

At full speed the fans move 37.8 CFM while producing 25 dBA, a level that stays consistent during prolonged operation. The hydro bearing is designed to maintain stable rotation over long sessions without the noise increase that sleeve bearings often show. An RF wireless remote lets you lower speed or change lighting modes instantly when the system settles into a steady load.

5 V 3-Pin ARGB Ecosystem Limits

The fans connect via a 5 V 3-pin ARGB header and sync with ASUS Aura, MSI Mystic Light and Gigabyte RGB Fusion software. The control box caps the addressable device count at 10 fans plus two LED strips, so larger loops require a second controller. Builders whose motherboards lack a 5 V 3-pin header cannot use the motherboard sync function and must rely on the remote alone.

Highlights

  • RF wireless remote adjusts speed, mode and colour with one key press
  • ARGB control box powers up to ten fans and two LED strips
  • 120 mm fans deliver 37.8 CFM airflow for high-volume cooling
  • Hydro bearing runs at 25 dBA for quiet operation
  • 5V 3-pin motherboard sync works with ASUS Aura, MSI and GIGABYTE software

Specifications

BrandCORN
Fan Counts5 Fans
TypeCase Fan
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM0-1400 RPM
Air Flow37.8CFM ±10%
Noise Level25 DBA±10%
ColorBlack
LEDRGB

Questions about this item

How loud are the 120mm fans at 1400 RPM when the PC runs all day?

At full speed they reach 25 dBA ±10%, which is a quiet whisper level suitable for continuous use.

Does the 5-pack include everything needed to power and control the ARGB lighting?

Yes, the box contains an ARGB control hub that supports up to 10 ARGB fans and two ARGB LED strips, plus an RF wireless remote for speed, mode and colour changes.

Can I mix these 120mm fans with older 3-pin or 4-pin case fans on the same motherboard headers?

Each fan uses a standard 3-pin ARGB connector for lighting and a separate power connector, so they work alongside legacy fans as long as the board has a 5 V 3-pin ARGB header or you use the included hub.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.