We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 120 mm square PWM case fan with addressable RGB lighting and translucent blades

Corn Electronics

Corn Electronics 120 mm PWM Case Fan White Addressable RGB 2150 RPM 69 CFM

SKU CH-P2AZ-PZ799

A 120 mm PWM case fan with addressable RGB lighting delivers up to 2150 RPM, 69 CFM airflow and 2.87 mm H2O pressure at 28.1 dBA

  • TypeCase Fan
  • ColorWhite
  • LEDAddressable RGB

Model 120mm

  • Quiet operation at 28.1 dBA maximum noise
  • High airflow of 69 CFM for effective cooling
  • Addressable RGB lighting via 5V 3-pin connector
  • PWM control up to 2150 RPM for precise speed
  • S-FDB V2 bearing ensures durable performance

White 120 mm Addressable RGB PWM Case Fan

This 120 mm case fan from Corn Electronics uses addressable RGB lighting and a 4-pin PWM connector for speed control. It suits builders who want synchronised lighting effects in a white-themed chassis. The S-FDB V2 bearing is rated for long service life at up to 2150 RPM. Buyers who need a non-LED fan or a 3-pin voltage-controlled model should look elsewhere.

Installation notes and common issues

The fan mounts in any standard 120 mm location using the four corner screw holes. Connect the 4-pin PWM header to the motherboard for automatic speed curves and the 5V 3-pin ARGB header to a compatible controller or board for lighting sync. A frequent mistake is plugging the ARGB lead into a 12V 4-pin RGB header, which will damage the LEDs. Ensure the motherboard supplies a 5V ARGB pinout before connecting.

Maximum airflow and static pressure

At full speed the fan delivers 69 CFM of airflow and 2.87 mm H2O of static pressure while producing 28.1 dBA of noise. These figures determine whether the fan can move enough air through a restrictive radiator or dense mesh front panel. If your build requires higher static pressure for thick radiators or higher airflow for open-air cooling, this model may not meet the target.

Highlights

  • Quiet operation at 28.1 dBA maximum noise
  • High airflow of 69 CFM for effective cooling
  • Addressable RGB lighting via 5V 3-pin connector
  • PWM control up to 2150 RPM for precise speed
  • S-FDB V2 bearing ensures durable performance

Specifications

TypeCase Fan
ColorWhite
LEDAddressable RGB

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I confirm the fan is spinning at the rated 2150 RPM after installation?

Use BIOS hardware monitor or fan-control software to read the 4-pin PWM signal; the fan should report up to 2150 RPM ±10 % under full load.

What comes in the box and what must I buy separately?

The fan includes a 4-pin PWM power connector and a 5 V 3-pin ARGB lead; no mounting screws, fan hub or controller are supplied.

Which version should I choose for a white 120 mm addressable RGB build?

This single white 120 mm model with 5 V 3-pin ARGB and 4-pin PWM matches the stated 69 CFM airflow and 28.1 dBA noise rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.