We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10-port SATA fan hub with long power and PWM cables

Corn Electronics

Corn Electronics 10 Port SATA Power Splitter Cord FH-10 PWM

SKU CH-73DF-EK756

A 10-port SATA-powered PWM fan hub with a 500 mm power cable and 700 mm PWM lead, rated for 5 A at 12 V

  • TypeCase Fan Accessory
  • ColorBlack
  • LEDNo

Color Black

  • Connect up to 10 fans from one SATA power source
  • PWM cable reaches 700 mm for flexible routing
  • SATA power cable spans 500 mm to reach drive bays
  • Rated at 5 A continuous for stable multi-fan operation
  • 12 V input matches standard PSU rail for direct compatibility

10-Port SATA Fan Hub

The Corn Electronics FH-10 is a case fan accessory that distributes a single PWM signal and 12 V SATA power to ten extension ports. It targets builders who need to run many fans from one motherboard header without exceeding the header’s current limit.

Replaces Daisy-Chain Cables

This hub replaces fragile daisy-chain splitters by providing a dedicated 500 mm SATA power-in lead and a 700 mm PWM-in lead rated for 5 A total. The jump is worth it when the motherboard header cannot supply enough current for all connected fans.

Suits High-Density Air Builds

It suits high-density air-cooling builds that require ten fans on a single PWM curve. Builders who need voltage control instead of PWM, or who want to power devices other than fans, should look at something else.

Highlights

  • Connect up to 10 fans from one SATA power source
  • PWM cable reaches 700 mm for flexible routing
  • SATA power cable spans 500 mm to reach drive bays
  • Rated at 5 A continuous for stable multi-fan operation
  • 12 V input matches standard PSU rail for direct compatibility

Specifications

TypeCase Fan Accessory
ColorBlack
LEDNo

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 500 mm SATA power-in cable reach a bottom-mounted PSU in a full-tower case?

The SATA power-in cable is 500 mm long; measure from your PSU to the planned hub location to confirm reach.

How do I connect the 700 mm PWM-in cable to the motherboard so all 10 fans follow one curve?

Plug the single 700 mm PWM-in cable into one motherboard PWM header; the hub then mirrors that signal to all 10 extension ports.

When should I replace the hub if I run 10 fans near the 5 A limit?

Replace the unit if the SATA connector or cables become warm, discoloured or if fans start stuttering under sustained 5 A load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.