We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled P-tap cable with Canon LPE6 connector, extends from 18 to 48 inches

Core SWX

Core SWX P-tap Cable for Canon LPE6 computer power cord

SKU CH-SEYM-EQ70D

Coiled P-tap cable powers Canon LPE6 devices at 11 V or 28 V DC with 2 A output, extending from 18 to 48 inches

  • TypeBattery Cord
  • Coiled P-tap cable regulates 11 V or 28 V DC output
  • Extends from 18 inches to 48 inches for flexible rigging
  • Powers Canon LPE6 batteries in DSLRs and monitors
  • Delivers up to 2 A current for stable device operation
  • Lifetime warranty backs the cable for long-term use

Core SWX P-tap Cable for Canon LPE6

This new battery cord connects a P-tap power source to devices using a Canon LPE6 battery mount. The coiled design stretches from 18 inches to 48 inches for flexible placement. It suits camera operators powering Canon DSLRs or SmallHD monitors from a professional battery plate.

For camera rigs needing regulated 11 V

The cable delivers up to 2 A at either voltage rating to compatible monitors, batteries or digital cameras. It is not for users requiring a different battery connector type or a higher current capacity than 2 A. Builders needing a straight cable or a different voltage should look elsewhere.

Dual 11 V and 28 V DC regulated output

The single specification that decides fit is the voltage rating your device requires at the LPE6 mount. This cord supports both 11 V DC and 28 V DC at 2 A through the same P-tap connection. Confirm your equipment accepts one of these voltages before purchasing.

Highlights

  • Coiled P-tap cable regulates 11 V or 28 V DC output
  • Extends from 18 inches to 48 inches for flexible rigging
  • Powers Canon LPE6 batteries in DSLRs and monitors
  • Delivers up to 2 A current for stable device operation
  • Lifetime warranty backs the cable for long-term use

Specifications

BrandCore SWX
TypeBattery Cord

Questions about this item

How long does the coiled P-tap cable last before it needs replacing?

The cable carries a lifetime limited warranty from Core SWX, so it is designed to remain in service for the life of your kit without a scheduled replacement interval.

What stops the cable from delivering full power during a long shoot?

The 2 A current rating is the limiting factor; drawing more than 2 amps will cause the regulated output to sag or shut down.

Does the cable get hot or draw extra power when run all day?

The regulated 11 V DC or 28 V DC output stays within its 2 A rating, so heat and power draw remain low during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.