Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Cooler Master
A 240 mm all-in-one liquid cooler with dual 120 mm ARGB PWM fans, a 3100 RPM dual-chamber pump and 400 mm tubing for AMD AM5/AM4 and Intel LGA 1851/1700 sockets
The Cooler Master MasterLiquid ML240R RGB is a 240 mm all-in-one liquid cooler designed for mainstream CPU sockets. It targets builders who want quiet liquid cooling with addressable RGB lighting in a white finish. The unit fits AMD AM4, AM5 and Intel LGA 1700 and 1851 platforms. It arrives pre-filled and ready for straightforward installation.
This cooler replaces basic boxed air coolers or entry-level 120 mm AIOs when lower noise and better thermal headroom matter. The jump is worth it if your current cooler hits high fan speeds under sustained loads. The dual-chamber pump runs at 3100 RPM with a 25 dBA rating, while the two 120 mm fans operate between 650 and 1750 RPM at up to 30 dBA. Included Cryo-Fuze paste simplifies the swap.
The 240 mm aluminium radiator and dual 120 mm fans move up to 120 m³/h of airflow for typical mid-range CPU workloads. It comfortably handles gaming and productivity sessions without thermal throttling. Headroom decreases with heavily overclocked high-core-count processors that exceed the radiator dissipation area. The 400 mm tubing length allows flexible routing in most standard chassis layouts.
| Series | MasterLiquid ML240R RGB |
|---|---|
| Type | AIO |
| Pump Speed | 3100 ± 300 RPM |
| Pump Dim. | 83 x 76.2 x 52.3 mm / 3.3 x 3 x 2.1 inch |
| Pump Bearing | Sleeve Sleeve Bearings |
| Pump Noise | 25 dBA |
| Radiator Size | 240 mm |
| Radiator Material | Aluminum |
| Fan Size | 2 Fan Slots (120 mm) |
| Fan Dim. | 120 x 120 x 25 mm / 4.7 x 4.7 x 1.0 inch |
| Bearing Type | Sleeve Bearings |
| Fan RPM | 650-1750 RPM ± 10% |
| Fan Air Flow | 120m³/h (70.7CFM) |
| Fan Noise | 30 dBA |
| Fan Connector | 7-Pin PWM + ARGB |
| Color | White |
| LED Color | ARGB |
The radiator is 240 mm long and each fan measures 120 x 120 x 25 mm, so you need room for a 240 mm radiator plus 25 mm fan thickness on the mounting side.
Orient the infinity mirror pump cover so the logo is upright, then connect the 7-pin PWM+ARGB cable to the motherboard header; the step often missed is plugging in the ARGB lead for lighting control.
Reapply the supplied Cryo-Fuze paste whenever you remove the pump from the CPU, typically every two to three years or if temperatures rise noticeably.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?