We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM5126412800DIMM 4GB DDR3 1600 Dell Optiplex 3010 MT DT SFF memory upgrade

SKU CH-MAER-A32B2

4GB DDR3 1600 memory module for Dell Optiplex 3010 desktop and small-form-factor systems

  • Capacity4GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 4GB single module expands Dell Optiplex 3010 to 8GB maximum
  • DDR3 1600 PC3 12800 speed matches system specification
  • CL11 11-11-11 timing at 1.5V unbuffered non-ECC
  • 240-pin DIMM fits MT DT SFF form factors
  • Major brand chipset with guaranteed compatibility for Optiplex 3010

4GB DDR3 1600 for Dell Optiplex 3010

This 4GB DDR3-1600 module is built specifically for the Dell Optiplex 3010 in MT, DT and SFF chassis. It installs in a 240-pin DIMM slot and runs at 1.5 V with CL11 timing. The single-stick kit adds 4 GB of non-ECC unbuffered memory to a compatible system.

Suits owners of a 3010 needing a single 4GB stick

The module fits the three Optiplex 3010 form factors and uses major-brand chips backed by a compatibility guarantee. It is not for systems that require ECC or registered memory. Buyers who need more than 8 GB total capacity or a different DDR generation should look elsewhere.

DDR3-1600 240-pin non-ECC unbuffered spec

The decisive specification is the DDR3-1600 240-pin non-ECC unbuffered design with CL11 11-11-11 timing at 1.5 V. Verify that your Optiplex 3010 accepts this exact configuration before ordering.

Highlights

  • 4GB single module expands Dell Optiplex 3010 to 8GB maximum
  • DDR3 1600 PC3 12800 speed matches system specification
  • CL11 11-11-11 timing at 1.5V unbuffered non-ECC
  • 240-pin DIMM fits MT DT SFF form factors
  • Major brand chipset with guaranteed compatibility for Optiplex 3010

Specifications

BrandComputer Memory Solutions
ModelCM5126412800DIMM
Capacity4GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Optiplex 3010 (MT/DT/SFF)
Package Content1Memory Ram Stick

Questions about this item

Will the unbuffered non-ECC DDR3 1600 CL11 module need any future firmware updates or component swaps?

No firmware or component swaps are required; the module is a standard 240-pin DDR3 DIMM with a limited lifetime warranty from Computer Memory Solutions.

What sustained-use limit appears first when the OptiPlex 3010 runs with this 4 GB stick?

The system maximum of 8 GB across two sockets is the first ceiling; a single 4 GB module leaves one slot free for a matching upgrade.

How much heat or power does the 1.5 V CL11 stick add during all-day operation?

At 1.5 V with no heat spreader, the unbuffered DDR3 module draws nominal DDR3 power and runs at typical DDR3 temperatures for continuous use.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.