Computer Memory Solutions
Computer Memory Solutions CM5126410600DIMM 4GB DDR3 1333 for Gigabyte GA-78LMT-USB3 GA-870-UD3P GA-880G-USB3
4GB DDR3 1333MHz CL9 DIMM validated for Gigabyte GA-78LMT-USB3, GA-870-UD3P, GA-880G-USB3 boards
- Capacity4GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- Guaranteed compatibility with three Gigabyte boards
- 4 GB DDR3 capacity adds responsive multitasking
- 1333 MHz CL9 timing delivers stable throughput
- Single 240-pin unbuffered DIMM installs in seconds
- Lifetime warranty from Computer Memory Solutions
4GB DDR3 1333 for Gigabyte AM3+ boards
This 4GB DDR3 1333 module is built to match the Gigabyte GA-78LMT-USB3, GA-870-UD3P and GA-880G-USB3 motherboards. It runs at PC3-10600 speed with CL9 timing and 1.5V operation. The 240-pin unbuffered DIMM uses major-brand chips in a 2Rx8 layout without a heat spreader.
Builders upgrading listed Gigabyte models.
The stick is validated for the three named Gigabyte boards that support up to 32GB across four slots. It suits anyone adding a single 4GB DIMM to those systems. Buyers with different motherboards, laptops, or a need for ECC, registered, or faster memory should look elsewhere because this kit is not qualified for those uses.
Simple DIMM installation; verify slot population
Installation follows standard desktop DIMM procedure: align the notch, press until the latches click, and confirm the BIOS detects 1333 MHz at 9-9-9 timings. The most common issue is mixing this module with kits of different voltage, timing or density, which can prevent the system from posting or force a lower speed.
Highlights
- Guaranteed compatibility with three Gigabyte boards
- 4 GB DDR3 capacity adds responsive multitasking
- 1333 MHz CL9 timing delivers stable throughput
- Single 240-pin unbuffered DIMM installs in seconds
- Lifetime warranty from Computer Memory Solutions
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600DIMM |
| Capacity | 4GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Gigabyte Ga-78Lmt-Usb3, Ga-870-Ud3P, Ga-880G-Usb3 |
| Package Content | 1 Memory RAM Stick |
Questions about this item
Which motherboard socket and DDR3 slots does this 240-Pin DDR3 1333 module require?
It fits the 240-Pin DDR3 DIMM sockets on Gigabyte GA-78LMT-USB3, GA-870-UD3P or GA-880G-USB3 boards, which each provide four slots and support up to 32 GB total.
Will this CL9 1.5 V stick run stably with older DDR3 modules already installed?
The board will clock all modules to the slowest speed and highest latency present, so mixing with slower DDR3 works but the faster stick will downclock to match.
How can I confirm the 4 GB stick is recognised at 1333 MHz after installation?
Enter the BIOS or use a tool such as CPU-Z; the memory tab should show 4 GB size, DDR3 type, 1333 MHz frequency and 9-9-9 timings.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



