Computer Memory Solutions
Computer Memory Solutions CM2048642400DIMM 16GB DDR4 2400 CL17 1.2V
16 GB DDR4-2400 CL17 1.2 V DIMM validated for ASUS Prime and Strix B250 motherboards
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- 16 GB DDR4 2400 MHz capacity for responsive multitasking
- CL17 17-17-17 timing delivers low-latency data access
- 2 V operation reduces power draw and heat
- 288-pin unbuffered non-ECC DIMM fits listed ASUS B250 motherboards
- Single 16 GB module leaves three slots free for up to 64 GB total
16GB DDR4 module for ASUS B250 boards
This 16GB DDR4 DIMM runs at 2400MHz with CL17 timing and 1.2V operation. It targets owners of ASUS Prime B250M-C, B250M-PLUS, Strix B250F Gaming or Strix B250H Gaming motherboards who need a single-module capacity increase. The unbuffered, non-ECC design matches the desktop memory slots on these specific platforms. Computer Memory Solutions validates compatibility for the listed models only.
Sustained load behaviour on B250 platforms
The module operates at the standard 1.2V DDR4 voltage with 17-17-17 timings across the supported boards. Under continuous workloads the JEDEC-rated 2400MHz speed remains stable without requiring manual voltage increases or XMP profiles. The 2Rx8 rank organisation works within the chipset memory controller limits for these B250 motherboards. Thermal performance relies on case airflow as no heat spreader is fitted.
Installation notes and common issues
Insert the 288-pin DIMM into any available slot on the four-socket motherboard up to the 64GB maximum. The key notch aligns with the DDR4 slot orientation; forced insertion indicates wrong alignment. Systems may boot at a lower speed until the BIOS is set to 2400MHz or the SPD profile is accepted. Mixing with existing modules of different speed, latency or rank can prevent the system from posting.
Highlights
- 16 GB DDR4 2400 MHz capacity for responsive multitasking
- CL17 17-17-17 timing delivers low-latency data access
- 2 V operation reduces power draw and heat
- 288-pin unbuffered non-ECC DIMM fits listed ASUS B250 motherboards
- Single 16 GB module leaves three slots free for up to 64 GB total
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2048642400DIMM |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | ASUS/ASmobile Prime B250M-C, B250M-PLUS, Strix B250F Gaming, Strix B250H Gaming Motherboards |
| Package Content | 1Memory Ram Stick |
Questions about this item
How much heat and power does the 1.2V DDR4 2400 module add when the system runs all day?
The module operates at the standard DDR4 voltage of 1.2V without a heat spreader, so it adds minimal heat and power draw under continuous load.
What must my motherboard provide for this 288-pin DIMM to work?
Your board needs a DDR4 DIMM slot supporting 2400 MHz unbuffered non-ECC memory; the listed ASUS Prime and Strix B250 models are verified compatible.
Will this 16GB stick run alongside my existing slower DDR4 modules on a B250 board?
Yes, the motherboard will clock all installed DDR4 to the lowest common speed, so this CL17 2400 MHz module will downclock to match older sticks.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



