We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM1024642400DIMM 16GB DDR4 2400 CL17 2x8GB memory upgrade

SKU CH-A3SV-QX20C

16GB DDR4 2400 CL17 2x8GB kit validated for ASRock Fatal1ty Z170 and Z270 boards

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 16 GB kit for ASRock Z170 and Z270 boards
  • 2400 MHz DDR4 speed with CL17 latency
  • Two 8 GB unbuffered DIMMs at 1.2 V
  • 288-pin non-ECC modules using major-brand chips
  • Lifetime repair or exchange warranty from manufacturer

Compatible DDR4 kit for ASRock Z170 and Z270 boards

This 16 GB kit contains two 8 GB unbuffered DIMMs built to run at 2400 MHz with CL17 timing. It targets owners of the listed ASRock Fatal1ty motherboards who need a straightforward capacity increase without configuration hassle.

16 GB total with 64 GB platform ceiling

The two modules provide 16 GB of usable memory; the supported boards can accept up to 64 GB across four slots. Everyday multitasking and mainstream gaming sit well within this headroom, while heavy content-creation workloads or large virtual-machine sets will eventually require the remaining slots to be populated.

Low-voltage unbuffered modules run cool and quiet

Operating at 1.2 V with no heat spreader, the sticks add minimal thermal load and produce no audible noise. Power draw stays modest under normal desktop loads, leaving ample margin for the rest of the system.

Highlights

  • 16 GB kit for ASRock Z170 and Z270 boards
  • 2400 MHz DDR4 speed with CL17 latency
  • Two 8 GB unbuffered DIMMs at 1.2 V
  • 288-pin non-ECC modules using major-brand chips
  • Lifetime repair or exchange warranty from manufacturer

Specifications

BrandComputer Memory Solutions
ModelCM1024642400DIMM
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemASRock Fatal1ty Z170 Gaming K4, Z170 Gaming K6, Z170 Gaming K6+, Z270 Gaming K4, Z270 Gaming K6, Z270 Professional Gaming i7
Package Content2 Memory RAM Sticks

Questions about this item

Will these 2400 MHz DDR4 sticks work alongside the 2400 MHz DDR4 modules I already have in the other two slots?

The kit is validated for ASRock Fatal1ty Z170 and Z270 boards with four DDR4 slots supporting up to 64 GB. Installing two additional 8 GB DIMMs of the same speed and voltage fills the remaining channels without changing the memory controller settings.

How can I confirm the 16 GB kit is running at 2400 MHz with CL17 timings after installation?

Open the BIOS or a system-information tool and verify the memory frequency reads 2400 MHz and the timings show 17-17-17 at 1.2 V.

What does the package contain and is anything else required to use the memory?

The box includes two 8 GB 288-pin DDR4 DIMMs. No extra cables, brackets or software are needed; the modules plug directly into the motherboard slots.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.