Computer Memory Solutions
Computer Memory Solutions CM1024642400DIMM 16GB (2x8GB) DDR4 2400 CL17 for Supermicro X11SAE X11SAE-F X11SAE-M
16 GB dual-channel DDR4-2400 CL17 kit validated for Supermicro X11SAE-series motherboards
- Capacity16GB (2 x 8GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- 16 GB dual-channel kit boosts multitasking headroom
- 2400 MHz DDR4 speed matches platform spec
- CL17 17-17-17 timing keeps latency low
- 2 V operation reduces power draw
- Validated for Supermicro X11SAE, X11SAE-F, X11SAE-M boards
Compatible Server Memory Kit
This 16 GB kit contains two 8 GB DDR4 modules built for Supermicro X11SAE, X11SAE-F and X11SAE-M motherboards. Each stick is a 288-pin unbuffered DIMM rated at 2400 MHz with CL17 timings. The modules operate at 1.2 V and use a 2Rx8 rank configuration without ECC or a heat spreader.
Steady-State Operation
At the rated 2400 MHz speed the modules run continuously within standard JEDEC voltage limits, so thermal output remains predictable during long compute sessions. Because all installed memory runs at the slowest module or CPU capability, matching pairs like this kit avoid down-clocking that would occur with mixed speeds. The 17-17-17 timing stays consistent across sustained workloads without relying on overclocking headroom.
DDR4 Platform Limits
The supported Supermicro boards provide four DIMM slots and a 64 GB maximum capacity, so this 16 GB kit leaves room for expansion up to the platform ceiling. A 64-bit operating system is required to address more than 4 GB of memory. Mixing these sticks with modules of different speeds or latencies will force the entire array to run at the lowest common denominator.
Highlights
- 16 GB dual-channel kit boosts multitasking headroom
- 2400 MHz DDR4 speed matches platform spec
- CL17 17-17-17 timing keeps latency low
- 2 V operation reduces power draw
- Validated for Supermicro X11SAE, X11SAE-F, X11SAE-M boards
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM1024642400DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Supermicro X11SAE, X11SAE-F, X11SAE-M Motherboards |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
How much power does each 8 GB stick draw at the rated 1.2 V when the system runs continuously?
Each module operates at 1.2 V; total kit power equals 1.2 V multiplied by the combined current draw of the two sticks under load.
Does the Supermicro X11SAE motherboard need a specific BIOS version or CPU generation before this CM1024642400DIMM kit will post?
The kit is validated for the X11SAE, X11SAE-F and X11SAE-M boards; any BIOS that supports those boards will recognise the memory.
If I populate the remaining two DIMM slots with different DDR4 modules, what determines the final memory speed?
All installed memory runs at the slowest module's rated speed or the CPU's maximum supported DDR4 frequency, whichever is lower.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
$174.99
0.00210095BTC
In stock
minisforum
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
$6.99
0.00008392BTC
In stock