Computer Memory Solutions
Computer Memory Solutions CM10246410600SODRH 16GB DDR3 1333MHz 2x8GB MacBook Pro 15" 2011
16 GB DDR3 kit with two 8 GB SO-DIMMs at 1333 MHz for the 15-inch 2011 MacBook Pro
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 16 GB total capacity with two 8 GB modules for full dual-channel bandwidth
- 1333 MHz DDR3 speed rated at PC3-10600 for snappy system responsiveness
- CL9 9-9-9 timings at 1.5 V for stable low-latency operation
- 204-pin SO-DIMM form factor built for Apple MacBook Pro 15-inch Late 2011
- Guaranteed compatibility with Core i7 2.4 MD322LL/A by Computer Memory Solutions
16 GB DDR3 kit for Late 2011 MacBook Pro
This 16 GB kit contains two 8 GB DDR3 SO-DIMM modules rated at 1333 MHz with CL9 timing. It is built for the Apple MacBook Pro 15 inch Core i7 2.4 GHz Late 2011 model MD322LL/A. The unbuffered non-ECC sticks run at 1.5 V and use 204-pin connectors.
Tool-free installation with firm seating
Installation requires removing the bottom case and pressing each module into the two memory slots until they click. The most common issue is a module not fully seated, which causes the Mac to beep on startup or show less than 16 GB. Reseating both sticks usually resolves the problem.
Verify exact model identifier before ordering
This kit is validated only for the Late 2011 15 inch MacBook Pro with model number MD322LL/A. It is not for earlier 2011 models, later Retina models, 13 inch models or any non-Apple laptops. Confirm your Mac's exact identifier in About This Mac to avoid a mismatch.
Highlights
- 16 GB total capacity with two 8 GB modules for full dual-channel bandwidth
- 1333 MHz DDR3 speed rated at PC3-10600 for snappy system responsiveness
- CL9 9-9-9 timings at 1.5 V for stable low-latency operation
- 204-pin SO-DIMM form factor built for Apple MacBook Pro 15-inch Late 2011
- Guaranteed compatibility with Core i7 2.4 MD322LL/A by Computer Memory Solutions
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246410600SODRH |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple Macbook Pro "Core I7" 2.4 15" Late 2011 Md322Ll/A |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
After installing the two 8GB sticks in my Late 2011 MacBook Pro 15", how do I confirm the system sees the full 16GB at 1333MHz?
Open the Apple menu, choose About This Mac, then click Memory. The overview should show 16GB of DDR3 memory running at 1333MHz across both slots.
What exactly ships in the box, and do I need any tools or extra parts to fit the modules into the MacBook Pro?
The package contains two 8GB 204-pin DDR3 SO-DIMM sticks. No tools or additional components are required; the modules slot directly into the two memory sockets.
My MacBook Pro is the 2.4GHz Core i7 Late 2011 15-inch model (MD322LL/A). Is this 16GB kit the correct capacity for that machine?
Yes. The Late 2011 15-inch MacBook Pro with the 2.4GHz Core i7 supports a maximum of 16GB across its two slots, so this 2x8GB kit matches the full supported capacity.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



