Computer Memory Solutions
Computer Memory Solutions CM10246410600SODRH 16GB DDR3 1333MHz 2x8GB SO-DIMM memory upgrade
16 GB dual-channel DDR3 1333 MHz SO-DIMM kit for compatible MacBook Pro and ThinkPad L520 models
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 16 GB kit (2 × 8 GB) doubles system memory
- DDR3 1333 MHz PC3-10600 CL9 timing for responsive performance
- 204-pin SO-DIMM fits compatible MacBook Pro and ThinkPad L520 models
- Unbuffered 1.5 V non-ECC design matches factory specifications
- Major-brand chipset modules backed by CMS lifetime warranty
Compatible MacBook Pro 13.3 inch upgrade
This 16GB kit uses two 8GB DDR3 SO-DIMM modules rated at 1333 MHz with CL9 timing. It matches the specification for the Apple MacBook Pro Core i7 2.4 13.3 inch model Md314Ll/A and runs at the standard 1.5V. The unbuffered non-ECC design fits the notebook's two memory sockets directly.
Sustained load behaviour
Under continuous operation the modules maintain their rated 1333 MHz frequency and 9-9-9 timings at 1.5V without a heat spreader. The major brand chipset and 2Rx8 organisation deliver stable throughput for long rendering or compilation sessions. Thermal throttling is not a factor at this voltage and speed combination.
DDR3 SO-DIMM practical limits
The 204-pin DDR3 interface caps bandwidth at the PC3-10600 data rate, so heavier multitasking or virtualisation will hit that ceiling. The MacBook Pro platform accepts a maximum of 16GB across its two slots, which this kit already fills. Systems requiring ECC, registered modules or higher frequencies cannot use this memory.
Highlights
- 16 GB kit (2 × 8 GB) doubles system memory
- DDR3 1333 MHz PC3-10600 CL9 timing for responsive performance
- 204-pin SO-DIMM fits compatible MacBook Pro and ThinkPad L520 models
- Unbuffered 1.5 V non-ECC design matches factory specifications
- Major-brand chipset modules backed by CMS lifetime warranty
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246410600SODRH |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple MacBook Pro Core I7 2.4 13.3" 2.8 Md314Ll/A |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
Does the 1.5V DDR3-1333 kit run cool enough for all-day use in a MacBook Pro 13.3" 2.4 or 2.8?
The modules operate at the standard 1.5V DDR3 voltage with no heat spreader; they rely on the notebook's internal airflow, which is designed for this power level in the listed MacBook Pro models.
Must the MacBook Pro 13.3" 2.4 or 2.8 already have two empty SO-DIMM slots to install this 2x8GB kit?
The MacBook Pro 13.3" models referenced have two memory sockets; the 16GB kit fills both, so no empty slots are required beforehand — you replace the existing modules.
Will this 204-pin PC3-10600 CL9 kit work in a ThinkPad L520 5016, 5017, 7859 or 7860 that currently has factory memory installed?
The kit matches the DDR3-1333 CL9 204-pin specification for those ThinkPad L520 variants; it can replace or complement the factory modules up to the 16GB maximum supported by the platform.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



