Computer Memory Solutions
Computer Memory Solutions CM10246410600DIMM 16GB (2x8GB) DDR3 1333MHz CL9 1.5V memory upgrade
A 16 GB DDR3 kit with two 8 GB unbuffered DIMMs running at 1333 MHz CL9 1.5 V for Intel DH61 series motherboards
- Capacity16GB (2 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 16 GB dual-channel kit boosts multitasking headroom
- DDR3-1333 CL9 timing delivers responsive system performance
- 5 V standard voltage ensures broad motherboard compatibility
- 240-pin unbuffered non-ECC DIMMs install in Intel DH61 series boards
- Two 8 GB modules from Computer Memory Solutions ship new
Compatible 16 GB DDR3 kit for Intel DH61 boards
This 16 GB kit contains two 8 GB DDR3 1333 MHz modules built to PC3-10600 specification with CL9 9-9-9 timings at 1.5 V. The unbuffered non-ECC DIMMs use 240-pin layout and 2Rx8 organisation. They are validated for Intel DH61CR, DH61DL, DH61HO, DH61SA, DH61WWW and DH61ZE motherboards.
Verify your board and slots before ordering
Confirm the motherboard is one of the listed DH61 models and that it has two free 240-pin DDR3 slots. The system must accept non-ECC unbuffered memory at 1.5 V and support a total of 16 GB across two sockets. Check the current BIOS version and ensure the board does not require registered or ECC modules.
Suits owners of listed DH61 systems needing
Ideal for users upgrading the named Intel DH61 boards to the full 16 GB capacity with a matched pair. Not for builds that require ECC or registered memory, need speeds above 1333 MHz, use a different DDR generation, or have only a single memory slot available.
Highlights
- 16 GB dual-channel kit boosts multitasking headroom
- DDR3-1333 CL9 timing delivers responsive system performance
- 5 V standard voltage ensures broad motherboard compatibility
- 240-pin unbuffered non-ECC DIMMs install in Intel DH61 series boards
- Two 8 GB modules from Computer Memory Solutions ship new
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246410600DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Intel Dh61Cr, Dh61Dl, Dh61Ho, Dh61Sa, Dh61Www, Dh61Ze |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
Does the kit include both modules or do I need to buy a second stick separately?
The package contains two 8 GB modules for a total of 16 GB, so nothing else is required for a full upgrade.
My board has two slots — is this 2×8 GB kit the right choice or should I look for a single 16 GB stick?
With two slots the 2×8 GB kit fills both sockets and reaches the 16 GB maximum supported by the listed Intel DH61 boards.
Will the CL9 1333 MHz rating actually run at that speed on an Intel DH61CR?
The modules are rated DDR3 1333 (PC3 10600) CL9 and are guaranteed compatible with the DH61CR, DH61DL, DH61HO, DH61SA, DH61WWW and DH61ZE.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



