We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 DIMM stick with black chips, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 8GB DDR4 2133MHz CL15 DIMM memory upgrade

SKU CH-6GVX-Y8FYF

An 8 GB DDR4 DIMM rated at 2133 MHz with CL15 timing and 1.2 V voltage, validated for HP Omen 870-168d and ProDesk 600 G2 SFF/MT systems

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Timing15-15-15
  • Voltage1.2V
  • 8 GB capacity expands multitasking headroom for demanding workloads
  • DDR4 2133 MHz speed delivers responsive data throughput
  • CL15 latency timing supports quick memory access cycles
  • 2 V operation reduces power draw and heat output
  • Validated for HP Omen 870-168d and ProDesk 600 G2 SFF/MT systems

8GB DDR4-2133 DIMM for HP Desktops

This module provides 8GB of unbuffered DDR4 memory at 2133MHz with CL15 timing and 1.2V operation. It uses a 288-pin non-ECC design built with major-brand chips and no heat spreader. The stick is validated for HP Omen Desktop 870-168d and ProDesk 600 G2 SFF/MT systems.

Suits owners of listed HP models adding

Buyers who need ECC error correction or registered buffering cannot use this module. Systems requiring speeds above 2133MHz or capacities beyond the platform maximum of 64GB across four sockets should look elsewhere. The single 8GB stick fills one slot.

Installs by inserting the DIMM into a free 288-pin

Align the notch, press firmly until the retention clips click, and power on. Common issues include mismatched speeds if mixed with faster modules, exceeding the four-slot limit, or forgetting to seat the stick fully so the system does not recognise the added capacity.

Highlights

  • 8 GB capacity expands multitasking headroom for demanding workloads
  • DDR4 2133 MHz speed delivers responsive data throughput
  • CL15 latency timing supports quick memory access cycles
  • 2 V operation reduces power draw and heat output
  • Validated for HP Omen 870-168d and ProDesk 600 G2 SFF/MT systems

Specifications

BrandComputer Memory Solutions
ModelCM1024642133DIMM
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Timing15-15-15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP Omen Desktop 870-168d ProDesk 600 G2 Series SFF/MT
Package Content1 Memory RAM Stick

Questions about this item

Will this 288-pin DDR4 DIMM fit the four memory slots in my HP ProDesk 600 G2 SFF?

Yes, the module uses the standard 288-pin DDR4 form factor that matches the four DIMM sockets on the ProDesk 600 G2 SFF and MT chassis.

Can I add this CL15 2133 MHz stick alongside the original 2133 MHz memory already installed in my Omen 870-168d?

The system will run all modules at the lowest common speed and timing, so the new CL15 stick will operate correctly with existing 2133 MHz memory.

How can I confirm the 8 GB module is recognised at 2133 MHz after installation?

Open Task Manager or BIOS and verify the installed capacity shows 8 GB and the reported speed reads 2133 MHz.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.