We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 240-pin DDR3 DIMM modules, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1600MHz CL11 1.5V DIMM memory upgrade Dell Optiplex 7010 A71

SKU CH-S43H-S9T2H

8GB dual-channel DDR3 kit at 1600 MHz CL11 for Dell Optiplex 7010 systems

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 8GB dual-channel kit boosts multitasking with two 4GB modules
  • DDR3 1600MHz CL11 timing delivers responsive performance at 1.5V
  • 240-pin unbuffered non-ECC DIMMs install directly in Optiplex 7010 MT DT SFF
  • Major-brand chipset and 2Rx8 rank ensure stable operation
  • Guaranteed compatibility with Dell Optiplex 7010 A71 systems

Dell Optiplex 7010 memory upgrade

This 8 GB kit contains two 4 GB DDR3 DIMMs rated at 1600 MHz with CL11 timings. The modules run at 1.5 V and are unbuffered non-ECC parts built for 240-pin desktop slots. Computer Memory Solutions validates compatibility with the Optiplex 7010 in MT, DT and SFF chassis.

Suits owners of the Optiplex 7010 wanting

Builders who need ECC, registered modules or speeds above 1600 MHz should look elsewhere. Systems limited to lower DDR3 speeds will still run these sticks but at the board's maximum supported rate. Buyers with laptops or small-form-factor boards using SO-DIMMs cannot use this kit.

Single specification that decides fit: 240-pin

The motherboard must accept 240-pin unbuffered non-ECC DDR3 memory at 1.5 V. If the board uses a different pin count, voltage or memory generation the modules will not install or function. Check the system manual for the exact slot type before purchasing.

Highlights

  • 8GB dual-channel kit boosts multitasking with two 4GB modules
  • DDR3 1600MHz CL11 timing delivers responsive performance at 1.5V
  • 240-pin unbuffered non-ECC DIMMs install directly in Optiplex 7010 MT DT SFF
  • Major-brand chipset and 2Rx8 rank ensure stable operation
  • Guaranteed compatibility with Dell Optiplex 7010 A71 systems

Specifications

BrandComputer Memory Solutions
ModelCM5126412800DIMMHDR
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Optiplex 7010 (Mt, Dt, Sff)
Package Content2 Memory RAM Sticks

Questions about this item

How do I install the 240-pin DDR3 DIMMs in a Dell Optiplex 7010 and what step is often missed?

Align the notch on each 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that both 4GB sticks are detected at 1600 MHz.

What maintenance or replacement will this 8GB kit need over time?

No scheduled maintenance is required; if a module fails, replace the faulty 4GB stick with another DDR3 1600 CL11 1.5V unbuffered DIMM to keep dual-channel operation.

What limit appears first when the Optiplex 7010 runs sustained workloads with this memory?

The system maximum of 16 GB across four slots is the first ceiling; this 8 GB kit leaves two slots free for future expansion up to that limit.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.