Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR3 1333MHz CL9 DIMM Kit
DDR3 1333 MHz CL9 8 GB kit in two 4 GB unbuffered DIMMs, validated for Gateway Sx2110G-Uw318 and Sx2865-Ur308 desktops
- Capacity8GB (2 x 4GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 8 GB total capacity from two matched 4 GB modules
- 1333 MHz DDR3 speed rated at PC3-10600
- CL9 9-9-9 timing at standard 1.5 V operation
- Validated for Gateway SX2110G-UW318 and SX2865-UR308 desktops
- 240-pin unbuffered non-ECC DIMM form factor
Gateway SX2110G & SX2865 Desktop Kit
This 8 GB kit contains two 4 GB unbuffered DIMMs built for Gateway SX2110G-Uw318 and SX2865-Ur308 desktops. It runs at DDR3 1333 MT/s with CL9 timings and 1.5 V voltage. The modules use major-brand chips in a 2Rx8 configuration without heat spreaders. Computer Memory Solutions guarantees compatibility with the listed models.
Suitable for maxed-out upgrades
The kit fills both memory sockets and reaches the 8 GB maximum supported by these systems. Buyers who want more storage capacity must look at a different platform because the hardware limit is fixed. It is not for servers or workstations that require registered or ECC modules. The non-ECC unbuffered design matches the desktop chipset requirements exactly.
DDR3 1333 CL9 240-pin specification
The decisive figure is the DDR3 1333 (PC3 10600) speed with CL9 9-9-9 latency at 1.5 V. The 240-pin DIMM form factor fits the two available slots in the target Gateway desktops. Matching these exact electrical and mechanical parameters ensures the system will recognise and run the memory at rated settings.
Highlights
- 8 GB total capacity from two matched 4 GB modules
- 1333 MHz DDR3 speed rated at PC3-10600
- CL9 9-9-9 timing at standard 1.5 V operation
- Validated for Gateway SX2110G-UW318 and SX2865-UR308 desktops
- 240-pin unbuffered non-ECC DIMM form factor
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600DIMM |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Gateway Desktop Sx2110G-Uw318, Sx2865-Ur308 |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
Will the 1.5 V DDR3-1333 modules add noticeable heat or fan noise in a Gateway SX2110G-UW318 running 24/7?
The kit runs at standard 1.5 V DDR3-1333 with CL9 timings and no heat spreader, so thermal output matches typical unbuffered DIMMs and should not increase system fan activity.
Does my Gateway SX2865-UR308 need a BIOS update or specific chipset to recognise the 2Rx8 240-pin DIMMs?
The modules are validated for the Gateway SX2865-UR308 and SX2110G-UW318; they use major-brand chipsets and standard 240-pin DDR3, so no extra hardware or firmware steps are required.
Can I keep one existing 4 GB stick and add this 2 x 4 GB kit in the two DIMM slots?
The Gateway desktops have only two sockets and a maximum of 8 GB, so the 2 x 4 GB kit must occupy both slots — mixing with older modules would exceed the limit or leave a slot empty.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



