Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR3 1333MHz CL7 SODIMM for Apple iMac Core i7 2.8 21.5-Inch Mid-2011
8GB dual-channel DDR3 1333MHz CL7 SODIMM kit built for the 21.5-inch Mid-2011 iMac Core i7 2.8
- Capacity8GB (2 x 4GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL7
- Timing7-7-7
- Voltage1.5V
- 8 GB kit upgrades the iMac to 32 GB maximum
- CL7 timing at 1333 MHz speeds up everyday tasks
- 204-pin SODIMM fits the Mid-2011 21.5-inch iMac exactly
- Two matched 4 GB modules enable dual-channel operation
- Major-brand chips from Micron, Samsung or Elpida ensure reliability
Apple iMac Mid-2011 Memory Kit
This kit supplies two 4 GB DDR3 SO-DIMM modules for a total of 8 GB. The sticks run at 1333 MHz with CL7 timing and 1.5 V unbuffered operation. They are built to match the Apple iMac Core i7 2.8 21.5-Inch Mid-2011 specification. Each module uses a 204-pin layout and major-brand chipsets.
Ideal for iMac 2011 Upgrades
Owners of the named iMac model can install both sticks to reach 8 GB without compatibility guesswork. Buyers who need more than 8 GB or who are repairing a different computer should look elsewhere. The kit does not support ECC or registered memory configurations.
DDR3 1333 CL7 Specification
The decisive figure is the DDR3 1333 CL7 rating at 1.5 V in a 204-pin SO-DIMM form factor. If the target system requires a different speed, voltage or pin count, these modules will not function. Verified compatibility is limited to the listed iMac.
Highlights
- 8 GB kit upgrades the iMac to 32 GB maximum
- CL7 timing at 1333 MHz speeds up everyday tasks
- 204-pin SODIMM fits the Mid-2011 21.5-inch iMac exactly
- Two matched 4 GB modules enable dual-channel operation
- Major-brand chips from Micron, Samsung or Elpida ensure reliability
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600SODRH |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL7 |
| Timing | 7-7-7 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple iMac "Core i7" 2.8 21.5-Inch (Mid-2011) |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
Should I pick the 2×4 GB kit or a single 8 GB module for this iMac?
The kit provides two 4 GB sticks, letting you fill two of the four slots and leave room for future expansion up to 32 GB total.
Will the CL7 timing at 1333 MHz actually run at that speed in the Mid-2011 iMac?
The modules are rated DDR3-1333 CL7, and the iMac's memory controller supports that speed, so they will operate at the rated frequency and latency.
Does the 204-pin DDR3 SO-DIMM interface limit the maximum capacity I can install?
The iMac has four SO-DIMM sockets and a 32 GB maximum, so this 8 GB kit uses half the slots and stays within the supported limit.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



