Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR3 10600 1333MHz non-ECC SODIMM upgrade Toshiba Satellite C655D-S5529
DDR3 SODIMM kit with two 4 GB modules running at 1333 MHz for compatible Toshiba Satellite laptops
- Capacity8GB (2 x 4GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL7
- Timing7-7-7
- Voltage1.5V
- Guaranteed fit for listed Toshiba Satellite models
- 8 GB total capacity in a matched 2 x 4 GB kit
- DDR3 1333 MHz speed for responsive multitasking
- Low 1.5 V operation reduces power draw
- Unbuffered non-ECC SO-DIMM installs without configuration
Targeted Upgrade Kit
This 8 GB kit contains two 4 GB DDR3 SO-DIMM modules rated at 1333 MHz with CL7 timing. It is built specifically for the Toshiba Satellite C655D-S5529, C650D-St6N02 and C655D-S5531 notebooks. The unbuffered, non-ECC design matches the original memory configuration of those systems. Buyers with different laptop models or desktop boards cannot use this memory.
Matched Pair Advantage
The two sticks are sold as a tested pair so the memory controller can run in dual-channel mode without manual matching. Each module uses major-brand chips in a 2Rx8 organisation at 1.5 V. No heat spreaders, software or extra cables are included in the package. The only change over a single stick is the second module that completes the 8 GB maximum the supported notebooks accept.
Straightforward Installation
Installation requires opening the memory compartment, removing any existing modules and seating both 204-pin sticks firmly until the side clips lock. The most common issue is inserting a module at an angle so the golden contacts do not make full contact, which causes a no-post condition. Reseating both sticks usually resolves the problem. No BIOS update or driver is needed for the supported models.
Highlights
- Guaranteed fit for listed Toshiba Satellite models
- 8 GB total capacity in a matched 2 x 4 GB kit
- DDR3 1333 MHz speed for responsive multitasking
- Low 1.5 V operation reduces power draw
- Unbuffered non-ECC SO-DIMM installs without configuration
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600SODRH |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL7 |
| Timing | 7-7-7 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Toshiba Satellite C655D-S5529, C650D-St6N02, C655D-S5531 |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
Will the two 4 GB sticks need any cleaning or re-seating after long-term use in the Satellite C655D-S5529?
The 204-pin SO-DIMM modules are solid-state with no moving parts, so no routine cleaning or re-seating is required once they are installed in the two sockets.
What limit appears first when the memory runs at 1333 MHz CL7 continuously in the C655D-S5529?
The system maximum of 8 GB across the two slots is reached with this kit, so capacity is the first ceiling you hit under sustained workloads.
How much heat or extra power do the 1.5 V DDR3 modules add when the laptop runs all day?
Each 4 GB stick operates at the standard 1.5 V DDR3 voltage without a heat spreader, so thermal output and power draw stay within the notebook's original design envelope.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



