minisforum
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
$6.99
0.00008126BTC
In stock
Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR2 667MHz PC2-5300 ECC Fully Buffered DIMM memory upgrade
DDR2 667MHz ECC fully buffered DIMM kit adds 8GB to compatible Supermicro X7DVL server motherboards
- Capacity8GB (2 x 4GB)
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 667 (PC2 5300)
- CAS LatencyCL5
- Timing5-5-5
- Voltage1.8V
- ECC protection prevents data corruption on servers
- Fully buffered design supports heavy multi-module loads
- 667 MHz DDR2 speed matches board specs
- 8 GB kit fills two slots on Supermicro X7DVL
- 8 V operation keeps power draw low
8 GB DDR2 ECC kit for Supermicro servers
This 8 GB kit contains two 4 GB DDR2 667 MHz fully buffered DIMMs with ECC and a CAS latency of CL5. It is built for the Supermicro X7DVL-3, X7DVL-E and X7DVL-i motherboards and runs at 1.8 V. The modules use a 240-pin form factor and a 2Rx4 rank configuration.
Suits maintainers of legacy Supermicro platforms.
The memory is validated only for the three listed Supermicro server boards, which accept up to 16 GB across six sockets. Systems that require unbuffered DIMMs, a different pin count, a higher DDR2 speed grade or a non-ECC configuration cannot use this kit.
Fully buffered DDR2 667 MHz with ECC decides fit
The motherboard must support fully buffered DDR2 667 MHz ECC DIMMs on a 240-pin interface; any other memory standard or buffering scheme will be physically or electrically incompatible.
Highlights
- ECC protection prevents data corruption on servers
- Fully buffered design supports heavy multi-module loads
- 667 MHz DDR2 speed matches board specs
- 8 GB kit fills two slots on Supermicro X7DVL
- 8 V operation keeps power draw low
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM512725300FBDIMM |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Timing | 5-5-5 |
| Voltage | 1.8V |
| ECC | Yes |
| Buffered/Registered | Fully Buffered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Supermicro X7Dvl-3, X7Dvl-E, X7Dvl-I Motherboard |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
Will the fully buffered DIMM design require any special maintenance or replacement over time?
Fully buffered DIMMs contain an advanced memory buffer chip that handles signal integrity; no user-serviceable parts exist, so the modules themselves need no maintenance beyond keeping the server chassis clean.
What limit appears first when these 4 GB modules run sustained workloads on the X7DVL boards?
The six-slot, three-bank layout caps total capacity at 16 GB, so the channel population limit is reached before any thermal or bandwidth ceiling.
How much power and heat do the 1.8 V DDR2-667 modules add when the server runs all day?
Each stick draws 1.8 V at DDR2-667 speeds; fully buffered operation adds modest buffer-chip dissipation, but total draw stays within standard FB-DIMM thermal envelopes for 240-pin slots.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Intel
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466
$1,097.99
0.01276391BTC
In stock