Computer Memory Solutions
Computer Memory Solutions 4GB DDR3L 1600MHz SODIMM for Lenovo B50-30 Touch All-in-One memory upgrade
4GB DDR3L 1600 MHz SODIMM module for Lenovo B50-30 Touch All-in-One, CL11 timing at 1.35 V
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.35V
- Boosts multitasking with 4GB DDR3L 1600MHz module
- Low 1.35V operation cuts power draw and heat
- Guaranteed fit for Lenovo B50-30 Touch All-in-One
- CL11 timing keeps latency tight for everyday tasks
- 204-pin SODIMM installs in seconds with no tools
4 GB DDR3L SODIMM for Lenovo B50-30
This 4 GB DDR3L module runs at 1600 MHz with CL11 timing and 1.35 V operation. It uses a 204-pin SO-DIMM form factor and is unbuffered non-ECC memory. The single-rank 1Rx8 design fits the Lenovo B Series B50-30 Touch All-in-One. Computer Memory Solutions guarantees compatibility with this specific system.
Suits single-slot upgrades up to 16 GB
Builders expanding a B50-30 Touch All-in-One to the 16 GB maximum will use this module in one of two sockets. It works for replacing a failed stick or adding capacity when one slot is free. Buyers who want more storage or need ECC registered memory should look at something else. The 1.35 V DDR3L specification also means it will not suit systems requiring 1.5 V DDR3.
204-pin DDR3L 1600 MHz at 1.35 V
The decisive specification is the 204-pin DDR3L interface running at 1600 MHz with 1.35 V voltage. Only systems accepting DDR3L SO-DIMMs at this speed and voltage will post correctly. The Lenovo B50-30 Touch All-in-One is validated for this module. Any other platform must match these electrical and physical parameters exactly.
Highlights
- Boosts multitasking with 4GB DDR3L 1600MHz module
- Low 1.35V operation cuts power draw and heat
- Guaranteed fit for Lenovo B50-30 Touch All-in-One
- CL11 timing keeps latency tight for everyday tasks
- 204-pin SODIMM installs in seconds with no tools
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126412800SOSRL |
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Lenovo B Series B50-30 Touch All-in-One |
| Package Content | 1 Memory RAM Stick |
Questions about this item
How do I confirm the 4GB DDR3L 1600MHz module is running at CL11 1.35V after installation?
Open Task Manager or CPU-Z and verify the memory tab shows 1600 MHz speed, CL11 timings and 1.35 V voltage for the installed SODIMM.
What ships with the CM5126412800SOSRL kit and do I need extra parts for the Lenovo B50-30 Touch All-in-One?
The box contains one 4GB 204-pin DDR3L SODIMM stick; no additional components are required for the supported system.
Should I choose the single 4GB stick or add a second module to reach the 16GB maximum on this platform?
The board supports up to 16 GB across two slots, so adding a second identical 4GB stick gives 8 GB dual-channel performance while leaving room for further expansion.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



