Computer Memory Solutions
Computer Memory Solutions 4GB DDR3 1333 CL7 SODIMM 2Rx8
A 4GB DDR3 SODIMM module rated at 1333MHz CL7 for upgrading compatible Compaq Presario laptops
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL7
- Timing7-7-7
- Voltage1.5V
- 4GB capacity expands multitasking headroom for compatible Compaq notebooks
- DDR3-1333 CL7 timing delivers responsive data access at 1.5V
- 204-pin SO-DIMM form factor fits CQ57-439WM and G42-164LA slots
- Unbuffered non-ECC design ensures straightforward installation without configuration
- 2Rx8 rank organisation using major-brand chips supports stable dual-channel operation
System-Specific DDR3 SODIMM
This 4 GB DDR3-1333 module is built for the Compaq Presario CQ57-439WM and G42-164LA notebooks. It arrives as a single 204-pin SO-DIMM stick rated at CL7 7-7-7 timing and 1.5 V unbuffered operation. The 2Rx8 organisation uses major-brand chips and carries a lifetime warranty from Computer Memory Solutions.
Upgrade from 2 GB or 4 GB factory fit
The supported platforms ship with two slots and a maximum of 8 GB, so adding this stick doubles a 4 GB configuration or fills the second slot on a 2 GB base. The jump is worth it when the system feels sluggish with multiple browser tabs or office applications open. Matching the existing CL7 timing avoids down-clocking the new module to a slower CAS setting.
Check slot count and current population
Verify the notebook still has a free SO-DIMM socket before ordering; the CQ57 and G42 families provide two slots total. Confirm the installed memory runs at DDR3-1333 (PC3-10600) so the new stick operates at its rated speed without automatic reduction. Ensure the chassis allows access to the memory compartment without full disassembly.
Highlights
- 4GB capacity expands multitasking headroom for compatible Compaq notebooks
- DDR3-1333 CL7 timing delivers responsive data access at 1.5V
- 204-pin SO-DIMM form factor fits CQ57-439WM and G42-164LA slots
- Unbuffered non-ECC design ensures straightforward installation without configuration
- 2Rx8 rank organisation using major-brand chips supports stable dual-channel operation
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600SODRH |
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL7 |
| Timing | 7-7-7 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Compaq Presario Cq57-439Wm, G42-164La |
| Package Content | 1 Memory RAM Stick |
Questions about this item
Does this 204-pin DDR3 SODIMM fit the Compaq Presario CQ57-439WM and G42-164LA laptops?
Yes, it is validated for those models which have two SODIMM slots and a maximum memory capacity of 8 GB.
What is the correct way to seat the module and the step most people miss?
Align the notch on the 204-pin edge connector with the slot key, insert at a 30-degree angle, then press down firmly until both side clips click into place — the click is the step often missed.
Will this 1.5 V CL7 module need any firmware updates or paired replacement later?
No firmware updates are required; if you later add a second stick, match DDR3 1333 speed, CL7 timing and 1.5 V voltage for best stability.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



