We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR3 DIMM sticks in a row

Computer Memory Solutions

Computer Memory Solutions 32GB (4x8GB) DDR3 1600MHz CL11 1.5V DIMM memory upgrade

SKU CH-058X-4VKFH

Four 8 GB DDR3-1600 DIMMs totalling 32 GB for Dell Optiplex 9010 systems

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 32 GB total capacity across four 8 GB modules
  • 1600 MHz DDR3 speed rated at PC3-12800
  • CL11 latency with 11-11-11 timing at 1.5 V
  • 240-pin unbuffered non-ECC DIMM form factor
  • Guaranteed compatible with Dell Optiplex 9010 MT/DT/SFF/USFF

Compatible Dell Optiplex 9010 upgrade

This 32GB kit contains four 8GB DDR3 modules that run at 1600MHz with CL11 timings at 1.5V. The 240-pin unbuffered DIMMs are built for Dell Optiplex 9010 MT, DT, SFF and USFF systems. Computer Memory Solutions validates compatibility for these specific models.

Suits owners maxing out the Optiplex 9010

The kit fills all four slots to reach the platform limit of 32GB total memory. Buyers who need ECC error correction or registered modules should look elsewhere because this memory is non-ECC and unbuffered. Systems requiring lower voltage or a different DDR generation cannot use these sticks.

Check your Optiplex 9010 form factor first

Verify the chassis is MT, DT, SFF or USFF before ordering because other Dell models are not covered by the compatibility guarantee. Confirm the board has four free 240-pin slots and that the BIOS is current enough to recognise the full 32GB capacity. Ensure the operating system can address the total amount installed.

Highlights

  • 32 GB total capacity across four 8 GB modules
  • 1600 MHz DDR3 speed rated at PC3-12800
  • CL11 latency with 11-11-11 timing at 1.5 V
  • 240-pin unbuffered non-ECC DIMM form factor
  • Guaranteed compatible with Dell Optiplex 9010 MT/DT/SFF/USFF

Specifications

BrandComputer Memory Solutions
ModelCM10246412800DIMM
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Optiplex 9010 Mt/Dt/Sff/Usff
Package Content4 Memory RAM Sticks

Questions about this item

Does the Dell OptiPlex 9010 need all four DIMM slots filled for this 32 GB kit to run?

The Dell OptiPlex 9010 has four memory sockets and a maximum capacity of 32 GB, so this 4 x 8 GB kit fills every slot to reach that limit.

Will the 1.5 V DDR3 1600 modules work if I keep any original memory in the system?

All installed DDR3 memory runs at the lowest common speed and voltage; the 1.5 V CL11 modules will operate alongside existing sticks at the settings the BIOS selects for the combined set.

How can I confirm the full 32 GB is recognised after installing the four sticks?

Boot the OptiPlex 9010 and check the system BIOS or Windows Task Manager — both will show 32 GB total when all four 8 GB modules are seated correctly.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.