We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips no heat spreader 288 pin DDR4 DIMM

Computer Memory Solutions

Computer Memory Solutions 16GB DDR4 2400 CL17 DIMM memory upgrade C113

SKU CH-W8T0-YJR4G

16 GB DDR4 2400 CL17 DIMM for Gigabyte Z270 motherboards, 1.2 V unbuffered non-ECC

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 16 GB capacity expands system memory for demanding workloads
  • DDR4 2400 MHz speed delivers responsive data throughput
  • CL17 17-17-17 timings ensure stable operation at rated frequency
  • 2 V unbuffered design reduces power draw and heat
  • Validated for Gigabyte Z270 Gaming and HD3 series motherboards

16 GB DDR4 module for Gigabyte Z270 boards

This 16 GB DDR4 DIMM runs at 2400 MHz with CL17 timings and 1.2 V operation. It is built specifically for Gigabyte GA-Z270-Gaming 3, GA-Z270-Gaming K3, GA-Z270-HD3, GA-Z270-HD3P and GA-Z270-Phoenix Gaming motherboards. The single unbuffered non-ECC stick uses a 288-pin layout and 2Rx8 organisation. It targets owners of those boards who want a matched capacity increase.

DDR4 2400 speed ceiling and four-slot maximum

The Z270 platform tops out at DDR4 2400, so this module runs at the highest native data rate the chipset supports. The board provides four DIMM sockets with a 64 GB total limit, meaning a single 16 GB stick leaves three slots open for later expansion. A 32-bit operating system will not show more than 4 GB regardless of installed memory, so a 64-bit OS is required to use the full capacity. The lack of a heat spreader keeps the profile low for tight coolers.

Replaces smaller DDR4 sticks on Z270 systems

Builders running 4 GB or 8 GB modules can install this 16 GB DIMM to reach higher totals without exceeding the four-slot limit. The jump is worthwhile when the current kit caps usable memory below 64 GB and the workload needs more headroom. It is not suited for platforms that require ECC, registered memory or speeds beyond DDR4 2400.

Highlights

  • 16 GB capacity expands system memory for demanding workloads
  • DDR4 2400 MHz speed delivers responsive data throughput
  • CL17 17-17-17 timings ensure stable operation at rated frequency
  • 2 V unbuffered design reduces power draw and heat
  • Validated for Gigabyte Z270 Gaming and HD3 series motherboards

Specifications

BrandComputer Memory Solutions
ModelCM2048642400DIMM
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemGigabyte GA-Z270-Gaming 3, GA-Z270-Gaming K3, GA-Z270-HD3, GA-Z270-HD3P, GA-Z270-Phoenix Gaming Motherboards
Package Content1Memory Ram Stick

Questions about this item

Is the single 16GB module or a multi-stick kit the right choice for my GA-Z270-HD3P?

This is a single 16GB DIMM; the board supports up to 64GB across four slots, so you can add one now and expand later.

Will the DDR4-2400 CL17 rating deliver its full 2400MHz speed on a GA-Z270-Gaming K3?

The Z270 chipset natively supports DDR4-2400, so the module runs at its rated 2400MHz without manual overclocking.

Does the 288-pin DDR4 interface limit the usable bandwidth to PC4-19200 on these Gigabyte boards?

Yes, the 288-pin DDR4 connection caps throughput at the module's PC4-19200 (2400MHz) specification.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.