Computer Memory Solutions
Computer Memory Solutions 16GB DDR3L 1600 SODIMM 2x8GB CM10246412800SODRL
16 GB DDR3L 1600 SO-DIMM kit (2 × 8 GB) validated for HP 19-series all-in-ones
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.35V
- 16 GB dual-channel kit boosts multitasking with two 8 GB modules
- DDR3L 1600 MHz speed delivers responsive performance at PC3L 12800
- Low 1.35 V voltage reduces power draw and heat in compatible systems
- CL11 11-11-11 timing ensures stable operation for everyday workloads
- Validated for HP 19-2404, 19-2412, 19-3010, 19-3013W, 19-3210 all-in-ones
HP All-in-One Upgrade Kit
This 16 GB kit contains two 8 GB DDR3L SO-DIMM modules built for the HP 19-2404, 19-2412, 19-3010, 19-3013W and 19-3210 all-in-one systems. It uses a 204-pin unbuffered layout running at 1600 MHz with CL11 timing. The pack is intended for owners of those specific models who need to reach the platform maximum of 16 GB across two slots.
Low-Voltage Cool Operation
Each module operates at 1.35 V, the standard DDR3L voltage, which reduces heat output inside the compact all-in-one chassis. The sticks have no heat spreader, relying on the system's existing airflow to stay within safe temperatures. Power draw remains modest during typical desktop workloads, keeping fan activity quiet.
Steady Throughput Under Load
The CL11 11-11-11 timings deliver consistent bandwidth when the memory controller sustains reads and writes across both ranks. Dual-channel population fills both sockets, so the memory subsystem maintains its rated 12800 MT/s transfer rate without throttling during extended sessions. Non-ECC unbuffered design suits the consumer platforms listed.
Highlights
- 16 GB dual-channel kit boosts multitasking with two 8 GB modules
- DDR3L 1600 MHz speed delivers responsive performance at PC3L 12800
- Low 1.35 V voltage reduces power draw and heat in compatible systems
- CL11 11-11-11 timing ensures stable operation for everyday workloads
- Validated for HP 19-2404, 19-2412, 19-3010, 19-3013W, 19-3210 all-in-ones
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246412800SODRL |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp 19-2404, 19-2412, 19-3010, 19-3013W, 19-3210 |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
How do I install the 204-pin SODIMM modules into the HP 19-2404 all-in-one and what step is often missed?
Power off, unplug, open the memory access panel, align the notch on each 8 GB stick with the slot key, press firmly until the side clips click, then replace the panel — the step most people miss is pressing hard enough for both clips to engage.
Will the DDR3L 1600 memory need any firmware updates or periodic replacement during its service life?
No firmware updates are required; the modules are solid-state with no moving parts, so they do not wear out and have no scheduled replacement interval.
What is the first limitation you hit when running the CL11 1.35 V kit at full load for extended periods?
The memory controller caps throughput at the rated 1600 MHz DDR3L speed, so sustained bandwidth cannot exceed the PC3L 12800 specification.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



