Computer Memory Solutions
Computer Memory Solutions 16GB (4x4GB) DDR3-10600 ECC Registered DIMM 1333MHz Dell T7600
Four 4 GB DDR3-1333 ECC registered DIMMs totalling 16 GB for Dell Precision T7600 workstations
- Capacity16GB (4 x 4GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 16 GB kit upgrades Dell Precision T7600 to 128 GB max
- ECC registered DDR3-1333 guards data integrity in server workloads
- Four matched 4 GB modules install in quad-channel banks
- 240-pin DIMMs run at standard 1.5 V with CL9 timing
- Lifetime warranty from Computer Memory Solutions backs every stick
Dell T7600 ECC Registered Upgrade
This 16 GB kit contains four 4 GB DDR3-1333 registered ECC DIMMs built for the Dell Precision Workstation T7600. The modules run at 1.5 V with CL9 timing and use a 240-pin form factor. They are intended for server-class workloads that require error correction and registered buffering.
Replacing unbuffered or mixed ECC memory
The T7600 supports unbuffered ECC, registered ECC, or load-reduced DIMMs, but mixing those types is not supported. If the workstation currently uses unbuffered ECC modules, this registered kit replaces them for a consistent configuration. The upgrade is worthwhile when the system needs registered DIMMs to reach higher capacities or improved signal integrity.
Verify bank population and module rank
Before ordering, confirm that each memory bank will contain only like modules because x4 and x8 DRAM versions must not be mixed within the same bank. The platform provides 16 sockets across four banks and accepts up to 128 GB of registered ECC DIMMs. Ensure the existing layout can accommodate four 2Rx4 modules in the correct slots.
Highlights
- 16 GB kit upgrades Dell Precision T7600 to 128 GB max
- ECC registered DDR3-1333 guards data integrity in server workloads
- Four matched 4 GB modules install in quad-channel banks
- 240-pin DIMMs run at standard 1.5 V with CL9 timing
- Lifetime warranty from Computer Memory Solutions backs every stick
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5127210600ECCR2R4H |
| Capacity | 16GB (4 x 4GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Precision Workstation T7600 |
| Package Content | 4 Memory RAM Sticks |
Questions about this item
Will these 240-pin DDR3 modules fit the Dell Precision T7600 memory slots?
Yes, the 240-pin DDR3 form factor matches the T7600's registered DIMM slots exactly.
What is the correct way to populate the four modules across the T7600's sixteen sockets?
Install one 4 GB stick in each of the four banks, keeping identical 2Rx4 modules together per bank as the system requires.
When should the 2Rx4 registered ECC modules be replaced if ECC error counts rise?
Replace the kit when the system logs show increasing correctable errors, indicating the 2Rx4 chips are degrading.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



