Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR4 2400 CL17 for Gigabyte GA-H110M-S2 series memory upgrade
16 GB dual-channel DDR4 2400 CL17 kit validated for Gigabyte H110 motherboards
- Capacity16GB (2 x 8GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- 16GB dual-channel kit boosts multitasking headroom on supported Gigabyte H110 boards
- DDR4 2400 CL17 timing delivers responsive throughput for everyday workloads
- 2V unbuffered DIMMs run cool without a heat spreader
- Validated for GA-H110M-S2 series including S2H, S2HP, S2PH, S2PV, WW and H110N
- Two 8GB 288-pin modules fill both slots for a 32GB maximum capacity
16GB DDR4 Kit for Gigabyte H110 Boards
This 16GB kit contains two 8GB DDR4 2400 CL17 modules built for Gigabyte GA-H110M-S2 series motherboards. It suits owners of those boards who want to reach the platform's 32GB maximum using both memory slots. The unbuffered non-ECC DIMMs run at 1.2V with 17-17-17 timings. Buyers whose systems use a different chipset or who need ECC registered memory should look elsewhere.
Matched Pair Eliminates Mixing Risks
The two sticks are packaged together as a tested pair so they share identical timing and voltage characteristics. This removes the instability that can appear when dissimilar modules are combined on the H110 platform's two slots. No heat spreaders are included, keeping the profile low for tight CPU cooler clearances. The kit does not contain software, adapters or extra accessories beyond the two DIMMs.
Simple Two Slot Installation
Installation consists of seating both 288-pin DIMMs into the board's two DDR4 slots until the retention clips click. The motherboard firmware typically applies the 2400 speed and CL17 timings automatically. A common issue occurs when a 32-bit operating system is used because it cannot address the full 16GB capacity. Another frequent problem is forgetting to fully latch both clips which causes boot failures or memory errors.
Highlights
- 16GB dual-channel kit boosts multitasking headroom on supported Gigabyte H110 boards
- DDR4 2400 CL17 timing delivers responsive throughput for everyday workloads
- 2V unbuffered DIMMs run cool without a heat spreader
- Validated for GA-H110M-S2 series including S2H, S2HP, S2PH, S2PV, WW and H110N
- Two 8GB 288-pin modules fill both slots for a 32GB maximum capacity
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM1024642400DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Gigabyte GA-H110M-S2, GA-H110M-S2H, GA-H110M-S2HP, GA-H110M-S2PH, GA-H110M-S2PV, GA-H110M-WW, GA-H110N Motherboards |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
Will the DDR4 2400 modules need a firmware update or replacement if I later move to a newer motherboard?
These are standard JEDEC DDR4 2400 DIMMs with no firmware; they simply work or not with the new board's memory controller.
What limit appears first when the kit runs at full load for hours?
The motherboard caps total memory at 32 GB across its two slots, so capacity is the hard ceiling.
How much heat and power do the two 8 GB sticks draw during all-day operation?
Each stick runs at 1.2 V with no heat spreader, so thermal output stays low and fits standard case airflow.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



