Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3L 1600 SODIMM memory upgrade for Dell Optiplex 9010 All-In-One
16 GB dual-channel kit of 204-pin DDR3L SODIMM modules at 1600 MHz and 1.35 V for Dell Optiplex 9010 All-In-One
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.35V
- 16 GB total capacity for smoother multitasking
- DDR3L 1600 MHz speed keeps data moving quickly
- 35 V low voltage reduces power draw
- 204-pin SODIMM form factor fits the Dell Optiplex 9010 All-In-One
- Two 8 GB modules enable dual-channel performance
Dell Optiplex 9010 All-In-One memory upgrade
This 16GB kit contains two 8GB DDR3L SODIMM modules built specifically for the Dell Optiplex 9010 All-In-One. It targets owners of that system who need to reach the 32GB maximum capacity supported by the platform. The 204-pin form factor ensures physical compatibility with the integrated board.
Low-voltage DDR3L operation
Running at 1.35V, the modules draw less power than standard DDR3 while maintaining 1600MHz speed and CL11 timing. The unbuffered, non-ECC design keeps latency low for everyday workloads. No heat spreaders are fitted, so the sticks rely on the chassis airflow already present in the all-in-one enclosure.
Guaranteed system-specific compatibility
Computer Memory Solutions validates each kit against the Optiplex 9010 All-In-One to prevent fitment issues that affect the desktop variant. The two-stick package fills two of the four available sockets, leaving room for further expansion up to the 32GB limit. A limited lifetime warranty from the manufacturer covers the modules.
Highlights
- 16 GB total capacity for smoother multitasking
- DDR3L 1600 MHz speed keeps data moving quickly
- 35 V low voltage reduces power draw
- 204-pin SODIMM form factor fits the Dell Optiplex 9010 All-In-One
- Two 8 GB modules enable dual-channel performance
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246412800SODRL |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Optiplex 9010 All-In-One |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
How do I install the 204-pin DDR3L SODIMM modules in my Optiplex 9010 All-In-One, and what step is often missed?
Power off and unplug the system, then remove the rear cover to access the slots. Insert each module at an angle until the gold contacts disappear, then press down firmly until the side clips click. The step often missed is pressing down hard enough to engage both clips; a loose module will cause a no-boot condition.
What maintenance or replacement will this 16GB kit need during its service life?
The modules have no heat spreader and no moving parts, so no scheduled maintenance is required. If a stick fails, the limited lifetime warranty from Computer Memory Solutions covers replacement. The system board supports a maximum of 32GB across four slots, so you can add another identical kit later instead of replacing these.
What limit appears first when the memory runs sustained workloads at 1600MHz?
The DDR3L modules operate at 1.35V with CL11 11-11-11 timings. Under sustained load the first limit is the fixed voltage and latency; the chips cannot run tighter timings or higher frequency without exceeding the JEDEC DDR3L specification, so throughput caps at the rated PC3L 12800 bandwidth.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



