Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3L 1600 SODIMM Dell Optiplex 9020 AIO memory upgrade
16 GB kit of two 8 GB DDR3L 1600 SODIMM modules built for the Dell OptiPlex 9020 All-in-One
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.35V
- 16 GB total capacity in a matched 2 x 8 GB kit
- DDR3L 1600 speed rated at PC3L 12800 for responsive multitasking
- Low 1.35 V operation reduces heat and power draw
- 204-pin SODIMM form factor fits Dell Optiplex 9020 All-In-One slots
- CL11 11-11-11 timings deliver stable performance at stock settings
Dell Optiplex 9020 AIO memory upgrade
This 16GB kit contains two 8GB DDR3L SODIMM modules built for the Dell Optiplex 9020 All-In-One desktop. Each stick runs at 1600MHz with CL11 timing at 1.35V. The unbuffered, non-ECC design matches the factory specification for this system.
Upgrade from 8GB or less
Replacing a single 8GB module or a pair of 4GB modules with this kit doubles the installed memory to 16GB. The jump is worthwhile when the current configuration leaves headroom unused during multitasking or when the system runs a 64-bit operating system that can address more than 8GB.
Comfortable for office workloads, limited at 32GB
Sixteen gigabytes handles typical business applications, web browsing with many tabs and light virtualisation without paging. The platform maximum is 32GB across four sockets, so this kit leaves two slots open for a future increase but cannot exceed the 32GB ceiling.
Highlights
- 16 GB total capacity in a matched 2 x 8 GB kit
- DDR3L 1600 speed rated at PC3L 12800 for responsive multitasking
- Low 1.35 V operation reduces heat and power draw
- 204-pin SODIMM form factor fits Dell Optiplex 9020 All-In-One slots
- CL11 11-11-11 timings deliver stable performance at stock settings
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246412800SODRL |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Optiplex 9020 All-In-One Desktop |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
Will the 204-pin DDR3L SODIMM modules fit the Dell Optiplex 9020 All-In-One memory slots?
Yes, the 204-pin DDR3L SODIMM form factor matches the Dell Optiplex 9020 All-In-One slots. The kit provides two 8 GB modules for a total of 16 GB, and the system supports up to 32 GB across four sockets.
What BIOS setting or voltage step is often missed when installing these 1.35 V DDR3L sticks?
The modules run at 1.35 V DDR3L voltage. Most Dell Optiplex 9020 AIO units detect this automatically, but if the system defaults to 1.5 V you must set the memory voltage to 1.35 V in BIOS before booting.
When should I expect to replace the 2Rx8 DDR3L 1600 CL11 modules in this kit?
DDR3L SODIMMs have no moving parts and typically last the life of the Dell Optiplex 9020 AIO. Replace them only if memory diagnostics report errors or you need more than the 16 GB this kit provides.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



