We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 SODIMM modules side by side

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3 1333MHz CL9 SODIMM Alienware Phantom M11X R3 memory upgrade

SKU CH-SNXA-RZ04E

A 16 GB DDR3 1333 MHz CL9 SO-DIMM kit designed for the Alienware Phantom M11X R3

  • Capacity16GB (2 x 8GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16 GB dual-channel kit doubles notebook memory
  • DDR3 1333 MHz CL9 timing matches system spec
  • 204-pin SODIMM form factor fits Alienware M11X R3
  • 5 V unbuffered non-ECC design ensures stable operation
  • Guaranteed compatible with Alienware Phantom M11X R3

Alienware M11X R3 16GB kit

This 16GB kit contains two 8GB DDR3 SO-DIMM modules built for the Alienware Phantom M11X R3. Each stick runs at 1333MHz with CL9 timings and 1.5V voltage. The 204-pin form factor matches the laptop's two memory slots exactly. Computer Memory Solutions guarantees compatibility with this specific model.

Suits owners maxing the M11X R3

Buyers who want to reach the notebook's 16GB ceiling using both sockets will use this matched pair. A 64-bit operating system is required to address the full capacity. Systems limited to a single module, or users needing ECC or registered memory, should look elsewhere.

204-pin DDR3 1333MHz CL9 specification

The decisive figure is the 204-pin DDR3 1333MHz CL9 rating that matches the M11X R3's memory controller. Modules with a different pin count, voltage, or speed grade will not seat or boot in this platform.

Highlights

  • 16 GB dual-channel kit doubles notebook memory
  • DDR3 1333 MHz CL9 timing matches system spec
  • 204-pin SODIMM form factor fits Alienware M11X R3
  • 5 V unbuffered non-ECC design ensures stable operation
  • Guaranteed compatible with Alienware Phantom M11X R3

Specifications

BrandComputer Memory Solutions
ModelCM10246410600SODRH
Capacity16GB (2 x 8GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemAlienware Phantom M11X R3
Package Content2 Memory RAM Sticks

Questions about this item

Will 1333 MHz DDR3 run at that speed in my Alienware Phantom M11X R3?

The kit is rated for DDR3-1333 (PC3-10600) CL9; the M11X R3 memory controller supports that frequency natively, so the modules will operate at 1333 MHz without manual tuning.

Does the 204-pin SO-DIMM form factor match the M11X R3 slots?

Yes — each module uses the standard 204-pin DDR3 SO-DIMM edge connector that fits the two SODIMM sockets in the Alienware Phantom M11X R3.

How much space do the two sticks need inside the laptop?

Each stick is a low-profile SO-DIMM without a heat spreader, so the pair occupies only the two internal memory slots with no extra clearance required.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.