Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3 1333 SODIMM MacBook Pro 13 Early 2011
A 16 GB DDR3 kit with two 8 GB SODIMM modules rated at 1333 MHz and CL9 latency for the 2011 MacBook Pro 13
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 16 GB dual-channel kit doubles usable memory for demanding workloads
- 1333 MHz DDR3 speed matches the MacBook Pro Early 2011 specification
- 204-pin SO-DIMM form factor fits the factory memory slots exactly
- CL9 9-9-9 timing at 1.5 V delivers stable operation without voltage tweaks
- Lifetime warranty from CMS backs long-term reliability for the upgrade
System-specific DDR3 kit
This 16 GB kit contains two 8 GB SO-DIMM modules built to the DDR3 1333 standard. It is designed for the 13-inch MacBook Pro with a 2.3 GHz Core i5 released in early 2011. The pair provides the full 16 GB capacity in a matched set.
Verify your exact model
Check that your MacBook Pro is the early 2011 13-inch variant with model identifiers MC700LL/A, MacBookPro8,1 or A1278. The machine must accept 204-pin DDR3 SO-DIMMs running at 1.5 V. Systems with different model numbers or soldered memory cannot use these modules.
Unbuffered modules without spreaders
Each stick uses unbuffered, non-ECC chips in a 2Rx8 configuration and has no heat spreader. The low-profile design fits the tight SODIMM slots inside the MacBook Pro chassis. Installation requires only a small screwdriver to remove the bottom case and swap the existing memory.
Highlights
- 16 GB dual-channel kit doubles usable memory for demanding workloads
- 1333 MHz DDR3 speed matches the MacBook Pro Early 2011 specification
- 204-pin SO-DIMM form factor fits the factory memory slots exactly
- CL9 9-9-9 timing at 1.5 V delivers stable operation without voltage tweaks
- Lifetime warranty from CMS backs long-term reliability for the upgrade
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246410600SODRH |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple Macbook Pro "Core I5" 2.3 13" Early 2011 |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
Does the kit contain everything needed for the MacBook Pro 13 Early 2011 or must anything else be purchased?
The package includes two 8 GB DDR3 1333 SODIMM sticks for a total of 16 GB. No extra components are required for installation.
Should I choose this 16 GB kit or a different capacity for the Early 2011 13 inch model?
This 16 GB kit fills two slots. The machine supports up to 32 GB across four sockets, so a larger kit is only needed if you want the maximum.
What does the 1333 MHz rating mean once the memory is installed in the MacBook Pro?
The modules run at DDR3 1333 (PC3 10600) with CL9 timing at 1.5 V, matching the speed the Early 2011 13 inch MacBook Pro expects.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



