We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computar Ganz

Computar Ganz MCB-3.7P CCTV Camera 700TVL 3.7mm Pinhole Lens

SKU CH-YJ7P-2Q2MB

Compact 700 TVL CCTV camera with a 3.7mm pinhole lens for discreet monitoring in tight spaces

  • 700 TVL resolution delivers clear analog video detail
  • 7 mm conical pinhole lens fits discreet installations
  • Ultra-compact 25 mm square body suits tight enclosures
  • Separate OSD control on cable simplifies on-site adjustment
  • Digital noise reduction and motion detection enhance monitoring reliability

Computar Ganz MCB-3.7P CCTV Camera

The Computar Ganz MCB-3.7P is a new analog CCTV camera built around a Sony 1/3” 960H EXview HAD CCD II sensor that delivers over 700 TVL resolution. Its ultra-compact 25 x 25 mm body and 3.7 mm conical pinhole lens suit discreet installations in tight spaces such as ATM enclosures. A separate OSD control on the cable allows on-site adjustments. The unit runs on 12 VDC power.

Suitable Uses and Limits

This camera suits installers who need a miniature analog device for short-range monitoring in confined areas. The fixed 3.7 mm pinhole lens and 700 TVL output will not satisfy buyers who need varifocal optics, higher-resolution imaging, IP-network connectivity, or wider viewing angles for larger scenes.

Deciding Specification

The 3.7 mm conical pinhole lens sets the fixed field of view and minimum focus distance, making it the single specification that determines whether this camera fits the intended enclosure and coverage area.

Highlights

  • 700 TVL resolution delivers clear analog video detail
  • 7 mm conical pinhole lens fits discreet installations
  • Ultra-compact 25 mm square body suits tight enclosures
  • Separate OSD control on cable simplifies on-site adjustment
  • Digital noise reduction and motion detection enhance monitoring reliability

Specifications

BrandComputar Ganz
ModelMCB-3.7P

Questions about this item

What power supply do I need to run the 12VDC input on this MCB-3.7P camera?

You need a regulated 12VDC power source with a compatible barrel connector; the camera draws power through its attached cable.

Can I use this 700TVL analog camera with my existing 960H DVR recorder?

Yes, the Sony 960H EXview HAD CCD II sensor outputs a standard composite video signal that any 960H or D1 DVR will record.

How do I confirm the on-screen display menu is responding after I connect the separate OSD control?

Press the joystick on the cable-mounted OSD controller; the menu overlay should appear instantly on the monitor feed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.