We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
3 ft RG-6 coaxial cable with F-type connectors, black jacket, 95% braid shielding

Comprehensive Cable and Connectivity

Comprehensive Cable and Connectivity Pro AV/IT Series RG-6 Coaxial RF Cable 3ft

SKU CH-Y93Q-CXC32

RG-6 coaxial cable with 95% braid shielding for clean antenna signals over three feet

  • TypeAntenna Cable
  • Length3 ft.
  • Connector Detail1 x F Connector Antenna
  • ShieldingYes
  • 95% tinned copper braid blocks EM and RF interference
  • Low-loss RG-6 coax construction preserves signal integrity
  • Heavy-duty screw-on F connectors ensure secure fit
  • Molded strain relief with X-traflex jacket adds durability
  • RoHS compliant materials meet environmental standards

RG-6 Coaxial Cable for AV and IT

This 3 ft RG-6 coaxial cable carries antenna and RF signals in professional AV and IT installations. It uses low-loss coax construction with 95% tinned copper braid shielding to block electromagnetic and radio-frequency interference. Heavy-duty screw-on F connectors and molded strain relief protect the terminations. The x-traflex jacket adds durability for repeated handling.

Upgrade from basic patch leads

Replaces thin unshielded fly-leads that pick up noise on long runs or near power supplies. The jump is worth it when signal drop-outs, ghosting or hum appear on distributed video or broadband feeds. Installers who need reliable performance across patch panels, wall plates or modulator outputs will see the difference immediately.

Simple screw-on installation

Connectors thread onto standard F-type ports without tools, so termination takes seconds. The molded strain relief prevents the centre conductor from bending sharply at the jack, which is the most common failure point on cheaper cables. Ensure the connector is fully seated; a loose thread lets ingress degrade the shield effectiveness over time.

Highlights

  • 95% tinned copper braid blocks EM and RF interference
  • Low-loss RG-6 coax construction preserves signal integrity
  • Heavy-duty screw-on F connectors ensure secure fit
  • Molded strain relief with X-traflex jacket adds durability
  • RoHS compliant materials meet environmental standards

Specifications

BrandComprehensive
TypeAntenna Cable
Length3 ft.
Connector Detail1 x F Connector Antenna
ShieldingYes

Questions about this item

Does the 3 ft RG-6 cable need any special clearance behind the wall plate for the F-type connector?

The screw-on F connector adds minimal depth, so standard wall-plate clearance is sufficient for this 3 ft cable.

What is the most common mistake when tightening the screw-on F connectors on this cable?

Over-tightening with a wrench can damage the connector threads; hand-tight plus a quarter turn is the correct method.

How often should the 95% tinned copper braid shielding be inspected for wear?

Inspect the shielding and jacket annually; replace the cable if the braid is exposed or the moulded strain relief shows cracking.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.