COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
Splits one Corsair 6-pin port into three SATA power connectors spanning 50 cm with 15 cm between drives
- TypeSATA
- ColorSATA Port
- Length1.6 feet
- Connector Detail6 Pin, Sata 15 Pin
- Terminal GenderMale-to-Female
- Speed6 gigabits_per_second
- Powers three SATA drives from one Corsair PSU connector
- 6-pin male plugs into compatible Corsair RM, RMX, RMi, HX, HXi, CX, CX-M, CS, CS-M, SF, TX, AXi, AX series
- 18 AWG copper conductors with 6 Gb/s data transfer rating
- Main cable 20 in (50 cm) plus two 6 in (15 cm) branches
- Self-adhesive tape included for tidy cable routing
Compatibility & Use
This SATA power cable connects select Corsair PSUs to three drives or riser cards. It fits RM, RMX, RMi, HX, HXi, CX, CX-M, CS, CS-M, SF, TX, AXi and AX series units. The 6 pin male plugs into the PSU; three 15 pin SATA females power the devices.
Not For Other PSUs
Builders using Corsair SF-L, AX1200, AX750 or AX850 units cannot use this cable. Anyone with a non-Corsair power supply or an unlisted Corsair model should look elsewhere to avoid damage.
Sustained Load Behaviour
The 18 AWG copper conductors carry power continuously across the 50 cm main length and 15 cm branches. Self-adhesive tape secures the wiring during extended mining or server operation.
Highlights
- Powers three SATA drives from one Corsair PSU connector
- 6-pin male plugs into compatible Corsair RM, RMX, RMi, HX, HXi, CX, CX-M, CS, CS-M, SF, TX, AXi, AX series
- 18 AWG copper conductors with 6 Gb/s data transfer rating
- Main cable 20 in (50 cm) plus two 6 in (15 cm) branches
- Self-adhesive tape included for tidy cable routing
Specifications
| Brand | COMeap |
|---|---|
| Model | COMeap-SATA-Corsair |
| Type | SATA |
| Color | SATA Port |
| Length | 1.6 feet |
| Connector Detail | 6 Pin, Sata 15 Pin |
| Terminal Gender | Male-to-Female |
| Speed | 6 gigabits_per_second |
| Conductor | Copper |
| Features | Data Transfer |
Questions about this item
Which Corsair power supply series must I already own for this 6-pin-to-3×15-pin cable to work?
It is built for Corsair RM, RMX, RMi, HX, HXi, CX, CX-M, CS, CS-M, SF, TX, AXi and AX series units, but not SF-L, AX1200, AX850 or AX750 models.
Can I keep my older SATA hard drives or riser cards when using this adapter?
Yes, the three 15-pin SATA female connectors accept standard SATA power plugs on existing drives or riser cards.
How do I verify the cable is functioning correctly after connecting it?
Each attached drive or riser should spin up and be recognised by the system, confirming the 18 AWG copper conductors are delivering power properly.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



