We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

COMeap CPU 8 Pin Splitter 9.5-inch 24cm 18AWG Power Splitter Cord

SKU CH-2GZ2-H77SR

A 9.5-inch 18AWG cable splits one CPU 8-pin EPS connector into two detachable 4+4 male ends for motherboards needing dual 8-pin or 8+4-pin power

  • TypeBlack
  • ColorBlack
  • Connector Detail8 Pin EPS to Male-to-Female
  • Terminal GenderMale to Female
  • SpecificationsBlack, 0.05 kilograms
  • ShieldingBlack
  • Splits one EPS 8-pin into two detachable 4+4 connectors for dual-CPU motherboards
  • 5-inch 18AWG tin-coated copper cable keeps voltage drop low in tight builds
  • Male-to-female design plugs directly into PSU and motherboard without extra adapters
  • Supports ATX 4-pin, 8-pin, 8+4-pin and 8+8-pin EPS 12V headers
  • Includes self-adhesive tape for clean cable routing inside the case

Splitter for dual EPS 12V motherboards

This COMeap splitter lets a single power-supply EPS 12V output feed two motherboard CPU sockets. One 8-pin female connector plugs into the PSU; two detachable 8-pin (4+4) male ends connect to the board. It suits workstations and servers that require dual 8-pin or 8+4-pin ATX EPS 12V inputs.

Verify PSU and motherboard connectors first

Confirm the power supply has a spare 8-pin EPS 12V female port and that the motherboard uses ATX 4-pin, 8-pin, 8+4-pin or 8+8-pin EPS 12V headers. The cable is not compatible with graphics-card power sockets and will be damaged if plugged into a GPU.

18 AWG sleeved wire with self-adhesive tape

The 24 cm assembly uses 1007-spec 18 AWG tin-coated copper conductors inside black sleeving. Each male end splits into a 4+4 arrangement so it can serve as an 8-pin EPS or a 4-pin ATX connector by sliding the halves apart. A self-adhesive tape strip is included for cable routing.

Highlights

  • Splits one EPS 8-pin into two detachable 4+4 connectors for dual-CPU motherboards
  • 5-inch 18AWG tin-coated copper cable keeps voltage drop low in tight builds
  • Male-to-female design plugs directly into PSU and motherboard without extra adapters
  • Supports ATX 4-pin, 8-pin, 8+4-pin and 8+8-pin EPS 12V headers
  • Includes self-adhesive tape for clean cable routing inside the case

Specifications

BrandCOMeap
ModelCOMeap Model 8 Pin Splitter
TypeBlack
ColorBlack
Connector Detail8 Pin EPS to Male-to-Female
Terminal GenderMale to Female
SpecificationsBlack, 0.05 kilograms
ShieldingBlack
ConstructionPower
FeaturesBlack
Disclaimernot_applicable

Questions about this item

What does the COMeap CPU 8 Pin Splitter include and is anything else needed?

The package contains one 9.5-inch splitter cable with a single 8-pin female connector and two detachable 8-pin (4+4) male ends, plus one self-adhesive tape for cable management. No extra parts are required.

Which version of the COMeap splitter should I choose for a motherboard with both 8-pin and 4-pin CPU power sockets?

This single model fits both layouts because each male end splits into a 4+4 configuration; slide off the 4-pin section when only an 8-pin or 4-pin connection is needed.

What does the 18AWG rating mean for real-world power delivery to the CPU?

The 1007-18AWG tin-coated copper wires are rated for the current drawn by standard EPS 12V CPU sockets, so the splitter reliably delivers power to dual 8-pin or 8+4-pin motherboard headers without voltage drop.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.