CMPLE
CMPLE 2-pack Cat5e 10 ft network ethernet cable white
Two 10 ft Cat5e patch cables with RJ45 connectors, rated for 350 MHz and 1 Gigabit speeds
- TypeRJ-45 Connector
- Length10 ft.
- ColorWhite
- 2-pack gives spare cables for multiple devices
- 10 ft length reaches across typical desk setups
- 350 MHz bandwidth supports 1 Gigabit speeds
- Gold-plated RJ45 contacts ensure reliable data transfer
- Flexible PVC jacket protects twisted-pair wiring
Two-pack 10 ft Cat5e cables
This CMPLE two-pack supplies two white Cat5e patch cords, each 10 ft long and terminated with 8P8C RJ45 plugs. The stranded copper-clad aluminium conductors follow the 568B wiring standard and are rated for 350 MHz bandwidth. A flexible PVC jacket protects the four twisted pairs during routing. The cables support Ethernet speeds up to 1 Gigabit per second.
Suits home and office Gigabit runs
These cords connect PCs, routers, switches, IP cameras, VoIP phones, gaming consoles and PoE devices at 10BASE-T, 100BASE-TX and 1000BASE-T rates. Installers who need shielded cable, solid-core conductors for in-wall pulls or lengths beyond 10 ft should select a different product. Buyers requiring transmission above 1 Gigabit will need a higher-category solution.
350 MHz bandwidth rating
The 350 MHz rating confirms the cable meets Cat5e performance for 1 Gigabit Ethernet over the full 10 ft length. This single figure determines whether the link will sustain gigabit throughput without errors. If the installation demands certified performance above that frequency, a Cat6 or higher cable is required.
Highlights
- 2-pack gives spare cables for multiple devices
- 10 ft length reaches across typical desk setups
- 350 MHz bandwidth supports 1 Gigabit speeds
- Gold-plated RJ45 contacts ensure reliable data transfer
- Flexible PVC jacket protects twisted-pair wiring
Specifications
| Brand | Cmple.com |
|---|---|
| Type | RJ-45 Connector |
| Length | 10 ft. |
| Color | White |
Questions about this item
How do I install the 8P8C RJ45 connectors on a Cat5e cable without damaging the latch?
Align the connector with the port, push straight in until the latch clicks, then tug gently to confirm it is seated; forcing it at an angle bends the latch and causes intermittent links.
What maintenance or replacement will the CCA conductors need over time?
Copper-clad aluminum wires are more brittle than solid copper; avoid repeated sharp bends or tight zip-ties, and replace any cable that shows kinked jackets or corroded gold-plated contacts.
At what point does the 350 MHz bandwidth limit appear during sustained 1 Gbps transfers?
The 350 MHz rating supports the full 1000 Mbps link, but unshielded twisted pairs can pick up alien crosstalk in dense bundles, so keep runs away from power cables to maintain error-free throughput.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



