We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black active adapter with DisplayPort plug, DVI-D dual-link socket, and attached USB-A power cable

Club3D

Club3D CAC-1010 DisplayPort to DVI Dual-Link Active Adapter USB-A Powered 2560x1600 60Hz

SKU CH-4EHV-8TE5B

Connects a DisplayPort source to a dual-link DVI-D display at up to 2560 x 1600 @ 60 Hz, drawing power from a USB-A port

  • Connect Apple Cinema Monitor via DisplayPort
  • USB-A powered so no extra adapter needed
  • 2560 x 1600 at 60 Hz for sharp detail
  • 3840 x 2160 at 30 Hz for 4K content
  • Digital-only signal requires Dual-Link DVI cable

Active DisplayPort to DVI adapter

The Club3D CAC-1010 is an active adapter that converts a DisplayPort source to a Dual-Link DVI-D signal. It draws power from an attached USB-A cable and includes a 60 cm tether. The adapter supports a maximum resolution of 2560 x 1600 at 60 Hz and 3840 x 2160 at 30 Hz. It is designed for single-display use and transmits digital signals only.

Suited for legacy monitors without HDCP

This adapter targets users connecting older Dual-Link DVI monitors such as Apple Cinema displays that do not require HDCP. It will not work with displays or sources that enforce HDCP handshakes. Analogue VGA signals are not supported, so VGA-only screens need a different solution. Buyers needing multi-monitor setups from one port should look elsewhere.

Dual-Link DVI-D output requirement

The adapter outputs a Dual-Link DVI-D signal and requires a Dual-Link DVI cable between the adapter and the monitor. A Single-Link DVI cable will not carry the higher resolutions. Verify that both the monitor and the cable support Dual-Link DVI-D before purchasing.

Highlights

  • Connect Apple Cinema Monitor via DisplayPort
  • USB-A powered so no extra adapter needed
  • 2560 x 1600 at 60 Hz for sharp detail
  • 3840 x 2160 at 30 Hz for 4K content
  • Digital-only signal requires Dual-Link DVI cable

Specifications

No published specifications for this item yet.

Questions about this item

What length is the attached USB-A power cable on the CAC-1010 adapter?

The attached USB-A power cable is 60 cm or 23.62 inches long, supplying the power the active adapter needs to drive a Dual-Link DVI display.

Does the CAC-1010 adapter require a separate DVI cable to reach the monitor?

Yes, you must connect a DVI Dual-Link cable between the adapter’s DVI-D port and the monitor; the adapter itself only outputs digital signals and does not carry the video link to the screen.

Will the CAC-1010 adapter need a firmware update or driver install to keep working with future operating systems?

The adapter is a pure hardware signal converter with no firmware or drivers, so no software updates are required; only the USB-A power connection must remain functional for continued operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.