Chronomite
Chronomite R-48L/208 208VAC 48A Electric Tankless Water Heater
Delivers on-demand hot water at up to 5 gpm with a 0.34 gpm activation threshold and adjustable 70–125 °F output
- TypeWater Heaters
- Delivers up to 125 °F for reliable hot water
- Activates at just 0.34 gpm for low-flow fixtures
- 208 V single-phase design fits standard commercial panels
- Adjustable thermostat lets you set 70–125 °F precisely
- Compact 10.63 × 9.88 × 4.25 in profile saves wall space
Electric tankless heater for indoor use
The Chronomite R-48L/208 is an electric tankless water heater designed for indoor commercial and residential applications. It operates on a 208V AC single-phase supply and delivers hot water on demand without a storage tank. The unit activates at a minimum flow of 0.34 gpm and can supply up to 5 gpm.
Compact wall-mount design with NPT inlet
Installation involves mounting the compact enclosure, which measures 4.25 in deep by 9.88 in high by 10.63 in wide, and connecting the 3/4 in male NPT cold water inlet. The unit draws 48 A at 10,000 W, so the electrical service must support this load. Undersized wiring or an inadequate breaker are common issues that prevent correct operation.
Adjustable thermostat sets delivery temperature
The built-in adjustable thermostat controls the output temperature between a minimum of 70 Degrees F and a maximum of 125 Degrees F. This range determines whether the heater meets the specific temperature requirements of the intended application. Buyers needing temperatures outside this window should consider a different solution.
Highlights
- Delivers up to 125 °F for reliable hot water
- Activates at just 0.34 gpm for low-flow fixtures
- 208 V single-phase design fits standard commercial panels
- Adjustable thermostat lets you set 70–125 °F precisely
- Compact 10.63 × 9.88 × 4.25 in profile saves wall space
Specifications
| Brand | CHRONOMITE |
|---|---|
| Type | Water Heaters |
Questions about this item
How do I verify the unit is heating correctly after installation?
Confirm the adjustable thermostat is set between 70 and 125 degrees F and that water flows at or above 0.34 gpm to trigger the heating elements.
What connections and accessories are included versus what must be sourced separately?
The heater has a 3/4 in male NPT cold inlet; supply piping, fittings, a 208 V single-phase circuit rated for 48 A, and a 10,000 W breaker are not included.
Which flow rate and temperature range suit my application best?
The unit delivers up to 5 gpm with an adjustable output from 70 to 125 degrees F; choose a lower set point for hand-washing or a higher one for commercial sinks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



