We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chopmate active DisplayPort to HDMI cable, aluminium connectors, braided jacket, 6.6 ft

Chopmate

Chopmate DisplayPort to HDMI Cable 6.6FT Active DP 1.2 to HDMI 1.4 1080P@120Hz Alu Braided

SKU CH-AQEM-EX9X9

Active DisplayPort 1.2 to HDMI 1.4 cable delivers 1080p at 120 Hz or 4K at 30 Hz with 10.2 Gbps bandwidth and braided 6.6 ft length

  • Connect up to six displays simultaneously with multi-screen support
  • 1080p at 120 Hz refresh for smooth gaming visuals
  • Active DP 1.2 to HDMI 1.4 conversion without drivers
  • 32 AWG tinned copper with double shielding blocks interference
  • Aluminium housing and nylon braid withstand repeated bending

Active DisplayPort 1.2 to HDMI 1.4 Cable

This unidirectional cable connects a DisplayPort source such as a desktop graphics card or laptop to an HDMI display. It supports video resolutions up to 4K at 30 Hz, 2K at 60 Hz and 1080P at 120 Hz for smooth motion. The 6.6 ft length suits typical desk-to-monitor or laptop-to-TV setups.

Aluminium Shell and Braided Jacket

The aluminium connector housing aids heat dissipation while the nylon braided jacket resists wear far better than standard PVC. A 32 AWG tinned copper conductor with double shielding protects the 10.2 Gbps signal from electromagnetic interference. The no-buckle DisplayPort plug removes without squeezing a latch, reducing port strain during frequent swaps.

Check Your Source and Display Ports

Verify the source device has a full-size DisplayPort 1.2 output; this cable does not work in reverse from HDMI to DisplayPort. The HDMI sink must accept the desired resolution and refresh rate over its HDMI 1.4 input. Audio passes through for uncompressed 7.1, 5.1 or 2-channel formats without driver installation.

Highlights

  • Connect up to six displays simultaneously with multi-screen support
  • 1080p at 120 Hz refresh for smooth gaming visuals
  • Active DP 1.2 to HDMI 1.4 conversion without drivers
  • 32 AWG tinned copper with double shielding blocks interference
  • Aluminium housing and nylon braid withstand repeated bending

Specifications

No published specifications for this item yet.

Questions about this item

What DisplayPort standard does this active cable use and what practical refresh-rate ceiling does it enforce?

The cable is built to the DisplayPort 1.2 specification, which provides 10.2 Gbps bandwidth and caps output at 1080p 120 Hz, 2K 60 Hz or 4K 30 Hz.

What physical clearance and connector style are required on the source and display ends?

It needs a full-size DisplayPort output on the computer or graphics card and a standard HDMI input on the monitor, TV or projector; the unidirectional design means the DP plug must go to the source.

How is the cable installed and which orientation mistake stops it from working?

Plug the DisplayPort end into the PC or GPU and the HDMI end into the display; no driver is required, but reversing the connectors will give no signal because the cable is unidirectional.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.