We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black C13 to C14 power extension cables, six feet long, 16AWG, molded connectors

Centenex Electronics

Centenex Electronics C13 to C14 Extension Cable 6ft 16AWG 10A 5-pack Black

SKU CH-MAMP-VMC41

Five 6-foot 16 AWG cords rated 10 A at 125/250 V extend C13 connections for servers, PDUs and IT gear

  • ColorBlack
  • Five cables included for multiple device connections
  • 6 foot length reaches equipment across rack spaces
  • 16AWG conductors handle 10A at 125V/250V
  • IEC 60320 C13 to C14 connectors fit servers and PDUs
  • Molded strain relief ends protect against cable fatigue

Five-pack C13-to-C14 extension set

This five-pack supplies five black IEC 60320 C13-to-C14 extension cords, each six feet long. They connect servers, Antminers, power supplies, monitors, scanners, printers and other devices that use a three-pin shroud connector rated from 100 V to 250 V. The fully moulded ends include strain relief for durability in data cabinets or IT closets. Each cord is rated 10 A at 125 V or 250 V.

Replaces shorter or thinner factory leads

Standard 18 AWG cables supplied with many devices limit placement and run warmer under load. These 16 AWG cords provide a heavier-gauge path between a PDU and equipment, reducing voltage drop and heat when rack layouts demand extra reach. The upgrade is worth it whenever the stock cord is too short or too light for continuous 10 A operation.

Handles 10 A continuous loads with headroom

The 16 AWG construction comfortably carries the full 10 A rating at 125 V or 250 V, keeping high-wattage systems cooler than thinner alternatives. Headroom ends when total draw exceeds 10 A or when the installation requires a different connector type or a longer run than six feet.

Highlights

  • Five cables included for multiple device connections
  • 6 foot length reaches equipment across rack spaces
  • 16AWG conductors handle 10A at 125V/250V
  • IEC 60320 C13 to C14 connectors fit servers and PDUs
  • Molded strain relief ends protect against cable fatigue

Specifications

BrandCentenex Electronics
ColorBlack

Questions about this item

What length and gauge are the cables so I can check rack clearance?

Each cable is 6 feet long and built with 16AWG conductors, thicker than standard 18AWG leads for cooler high-wattage runs.

How do the IEC 60320-C14 and C13 ends connect, and what step do installers often miss?

Plug the C14 male end into the PDU outlet and the C13 female end onto the device inlet; the step often missed is seating both moulded connectors fully until the strain-relief collar locks.

What wear items should I plan to replace on these cords over time?

The cords have no user-replaceable parts; if the moulded C13 or C14 ends show cracking or the 16AWG jacket is damaged, replace the entire cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.