We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

CCS

CCS PS-2.5-12-25WT2 12V 2.5A 30W 5.5x2.5mm power adapter

SKU CH-TJC8-8V5JK MPN PS-2.5-12-25WT2

Delivers 12V 2.5A at 30W through a 5.5x2.5mm connector for compatible devices

  • Reliable 30W output powers 12V devices steadily
  • Wide 100-120V input suits North American mains
  • 5x2.5mm barrel fits many common laptops and routers
  • Built-in IV, SC and IO protection guards connected gear
  • Tested functional with only minor cosmetic surface marks

30W 12V AC adapter for 5.5x2.5mm devices

This 30W AC adapter delivers 12V at 2.5A through a 5.5x2.5mm barrel connector. It accepts 100-120V~50/60Hz input at 0.8A. The unit is designed to safely power compatible devices with built-in protection against incorrect voltage, short circuit and internal overheating. It is supplied new and fully tested for functionality.

Suits devices needing 12V 2.5A via 5.5x2.5mm jack

This adapter suits hardware that requires exactly 12V 2.5A and uses a 5.5x2.5mm centre-positive barrel jack. Buyers whose equipment demands a different voltage, a higher current rating or a different connector size should look at something else. It is not intended for devices that draw more than 30W or operate on multi-voltage input ranges beyond 100-120V.

Output fixed at 12V 2.5A 30W

The single specification that decides compatibility is the fixed 12V 2.5A output rated at 30W. The 5.5x2.5mm connector must match the device jack polarity and dimensions. Input is limited to 100-120V~50/60Hz so international use requires a suitable step-down transformer. No other output voltages or connector types are available on this model.

Highlights

  • Reliable 30W output powers 12V devices steadily
  • Wide 100-120V input suits North American mains
  • 5x2.5mm barrel fits many common laptops and routers
  • Built-in IV, SC and IO protection guards connected gear
  • Tested functional with only minor cosmetic surface marks

Specifications

ModelPS-2.5-12-25WT2

Questions about this item

Which 12V 2.5A adapter with a 5.5×2.5 mm plug should I choose?

The PS-2.5-12-25WT2 delivers 30 W at 12 V and 2.5 A through a 5.5 mm outer, 2.5 mm inner barrel connector, matching devices that specify that exact voltage, current and tip size.

What does the 30 W rating mean when the adapter is powering my device?

It means the unit can supply up to 12 V at 2.5 A continuously, so any load drawing 30 W or less at 12 V will run within its rated capacity.

What does the 100-120 V 50/60 Hz input actually cap in practice?

The adapter accepts mains voltages from 100 V to 120 V at either 50 Hz or 60 Hz, limiting its use to regions with that supply range without a step-down transformer.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.