We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
CARROFIX powered 3-to-2-wire trailer converter with 60 inch wiring harness and 4-way flat plug

CARROFIX

CARROFIX Powered 3-to-2-Wire Trailer Taillight Converter 60" exterior accessory

SKU CH-TXBT-1D53H

Converts a vehicle's 3-wire lighting system to a standard 2-wire trailer connection with a 60-inch harness and 5.0 amp capacity

  • TypeTrailer Accessories
  • Converts 3-wire vehicle systems to 2-wire trailer wiring
  • Includes 60" wiring harness with 4-way flat plug
  • Powers up to 5.0 amps for turn and brake circuits
  • Dust cover protects connector when not in use
  • Color-coded wires simplify matching to vehicle circuits

Vehicle 3-to-2 Wire Converter

The CARROFIX adapter connects a vehicle with separate turn and brake circuits to a standard two-wire trailer harness. It includes a four-way flat plug for tail, brake and turn-signal functions and a dust cover to protect the connector when not in use. Colour-coded leads match the corresponding vehicle wires for straightforward installation.

Powered Circuitry Handles 5.0 Amps

Built with surface-mount circuitry, the converter powers up to 5.0 amps for each right and left turn-and-brake channel. The solid-state design manages the electrical load without mechanical relays, keeping operation steady during normal towing use. No cooling provisions or fan noise are specified for this sealed unit.

60-Inch Harness and Dust Cover

A 60-inch wiring harness provides reach from the vehicle connector to the trailer plug. The bundled dust cover shields the four-way flat terminals from moisture and debris when the trailer is disconnected. No software or additional accessories are included with this converter.

Highlights

  • Converts 3-wire vehicle systems to 2-wire trailer wiring
  • Includes 60" wiring harness with 4-way flat plug
  • Powers up to 5.0 amps for turn and brake circuits
  • Dust cover protects connector when not in use
  • Color-coded wires simplify matching to vehicle circuits

Specifications

TypeTrailer Accessories

Questions about this item

How do I wire the CARROFIX converter into my vehicle's 3-wire system, and which step is often missed?

Match the colour-coded leads to the vehicle's separate turn and stop circuits, then plug the 4-way flat into the trailer; the step often missed is securing the dust cover on the vehicle-side connector when the trailer is disconnected.

What maintenance will the CARROFIX converter need over time?

Inspect the 60" harness and 4-way flat plug for corrosion or cracked insulation each season, reseat the connections, and replace the dust cover if the seal tears.

What is the first limit reached when the trailer lights run continuously?

The converter is rated for 5.0 amps per side on the right and left turn and brake circuits; exceeding that current will cause the internal protection to cut power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.