Canarm
Canarm AX18-2 18 in 115 V 200 cfm 22 sones accessory
18-inch exhaust fan delivers 200 cfm airflow at 22 sones on 115 V power
- TypeExhaust Fans
- 18 in blade diameter moves 200 cfm of air
- 22 sones maximum noise keeps operation quiet
- 115 V power suits standard household wiring
- Steel blade with aluminum frame resists corrosion
- Includes intake guard and shutter for ready installation
18 in exhaust fan for industrial ventilation
The Canarm AX18-2 is an assembled exhaust fan built for commercial or agricultural buildings that need high-volume air removal. Its 18 in blade diameter and 200 cfm rating at 0.000 in static pressure suit spaces where large amounts of stale air must be moved quickly. The unit runs on 115 V power and includes an intake guard and shutter for immediate installation.
Airflow capacity of 200 cfm at zero static pressure
This single figure determines whether the fan can meet the ventilation load of your space. At 0.000 in SP the unit delivers 200 cfm, but real-world duct runs, filters or louvers will reduce that number. Buyers who need guaranteed airflow at higher static pressure must verify performance curves that are not supplied here.
Ships assembled with guard and shutter for direct
The fan arrives fully assembled so mechanical installation is limited to securing the frame and wiring the 115 V supply. The included chrome-plated wire guard and aluminum shutter cover the intake side, but the galvanized steel blade and aluminum frame add weight that may require two people or lifting equipment. Wiring must comply with local codes and the unit carries a Proposition 65 warning for chemical exposure.
Highlights
- 18 in blade diameter moves 200 cfm of air
- 22 sones maximum noise keeps operation quiet
- 115 V power suits standard household wiring
- Steel blade with aluminum frame resists corrosion
- Includes intake guard and shutter for ready installation
Specifications
| Brand | CANARM |
|---|---|
| Type | Exhaust Fans |
Questions about this item
How much air does the 200 cfm rating actually move through a mounted unit?
The 200 cfm figure is measured at .000 in static pressure, so installed airflow will be lower once ductwork and grilles add resistance.
What does the 115 V supply imply for wiring and circuit planning?
It runs on a standard 115 V household circuit; no special voltage or phase is required beyond a correctly rated breaker and wire gauge.
What rough opening and clearance does the 18 in blade diameter need?
The 18 in blade calls for a matching 18 in rough opening plus enough depth for the assembled fan, shutter and chrome-plated wire guard to sit flush.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



